Manual

Visit us at www.mvpgroupcorp.com . For customer questions email: [e-mail]
NOTICE: Using a voltage other than specified on the rating plate will cause damage to the unit. Incorrect
voltage or modification to the power cord or electrical components can damage the unit and will void the
warranty.
5. After the installation is complete the thin breather wires on the top of the side glass panels may be
trimmed and crimped closed
Features and Controls
A Main Power Switch. Switch turns the power ON or OFF to
the equipment.
B Light Switch. Switches the lights ON or OFF.
C Multi-Function Power Button. Depending on the mode,
the button will turn the power ON or OFF to the controller
or increases the temperature.
D Multi-Function Button. Depending on the mode the
button will activate the defrost function or decreases the
temperature.
E Set Button. Switches the temperature setting mode ON or
OFF.
F Display. Displays the current temperature or the programmed temperature.
G Compressor Cycle Light. Illuminates steadily when the compressor is running. Light will flash when the
compressor is in the delay cycle. The flashing light will last for about two minutes and is a normal part of
the compressor cycle.
H Defrost Light. The light will flash when the equipment is in the defrost mode.
I Glass Heater Switch. Available on the countertop display cases with only operator side access. Not
available on drop-in cases or cases with customer-side (self-serve) access. Switches the glass defrost ON
or OFF.