Owner manual

VSBC-32 Serial Interface Piggybacks

ID 21168, Rev. 04 Page B - 7© PEP Modular Computers GmbH

4.2.1 SI-10BT Jumper Settings

Default settings are in italics.

Table B-4: Jumper J1 – Squelch Threshold

Setting Descirption

Open Normal

Set 4.5dB reduced threshold

Table B-5: Jumper J2 – Link Test

Setting Descirption

Open Link Test enabled

Set Link Test disabled

Table B-6: Jumper J3 – Shielding

Setting Descirption

Open Unshielded, 100 ohm termination

Set Shielded, 150ohm termination