Owner manual

VSBC-32 Memory Piggybacks

ID 21168, Rev. 04 Page A - 7© PEP Modular Computers GmbH

A.5 DM603

The DM603 is a memory piggyback fitted with:

• DRAM: 32 MB

• FLASH MEMORY:0, 0.5 (512 KB), 1, 2, or 4 MB

A.5.1 Board Layout and Jumper Location

A.5.2 Jumper Description and Flash Addresses

Default settings are in italics.

Table A-5: Jumpers: J1 and J2 Settings and Flash Memory Address Ranges

Setting Description

512KB or

1MB Flash

2MB Flash 4MB Flash

Set No Protection

Open Flash Bank 0: Write protected

Flash Bank 0: Address Range

Lower 512 KB

0x04000000 -

0x04080000

0x04000000 -

0x04200000

Lower 2 MB

0x04000000 -

0x04200000

Set No Protection

Open Flash Bank 1: Write protected

Flash Bank 1: Address Range

Upper 512 KB

(1MB only)

0x04080000 -

0x04100000

Upper 2 MB

0x04020000 -

0x04400000

Figure A-4: DM603 Mem-

ory Piggyback

Legend:

1. Flash Memory

2. DRAM

J1J1 J2