Owner manual

Functional Description VMP3
Page 2 - 8 © 2005 Kontron Modular Computers GmbH ID 29230, Rev. 01
29230.01.UG.VC.050727/091420
P R E L I M I N A R Y
2.4 VMP3 Board Interfaces
The following sections provide a specific information regarding the application interfaces avail-
able with the EBC-VME3 board.
2.4.1 J10 – VME Interface
The VME interface is based on the TUNDRA UNIVERSE II Bridge which includes the following
features required for 3U VME systems.
A24/A16 addressing modes capability
D16/D8 data transfer capability
Automatic First-Slot-Detection
Single level BR3 arbitration release-when-done
option
FAIR VMEbus arbitration option
ACFAIL NMI option
SYSFAIL IRQ option
System controller functions (SYSCLK, Bus
monitor, Power monitor)
Compatibility with Kontron 3U VME system
addressing schemes
Compatibility with Kontron VME backplane
design and feature set
Compatibility with Kontron backplane transceiver
logic
The following figure and table provide pinout and signal
information for this interface.
Figure 2-2: J10 - VME Connector
PINROWS
C B A
1
32