Owner manual

NetBootLoader VMP3
Page 5 - 36 © 2005 Kontron Modular Computers GmbH ID 29230, Rev. 01
29230.01.UG.VC.050727/091440
P R E L I M I N A R Y
SF
FUNCTION: Store FLASH contents to data buffer
SYNTAX:
sf -o[=]<offset> -l[=]<length>
where:
sf command
-o option: offset
<offset> parameter: value: hexadecimal
relative offset to start of FLASH contents to be
stored to the data buffer
-l option: length
<length> parameter: value: hexadecimal
length of FLASH contents to be stored to the data
buffer
DESCRIPTION: With the command “sf” a selected portion of the FLASH contents
may be copied to the local data buffer, e.g. for a subsequent upload
to the ftp server with the “put” command.
The “<offset>” parameter refers to the relative offset within the
FLASH area similar to the “lf” command. The parameter “<length>”
specifies the length to store.
USAGE: Store 64 kB of FLASH contents to the data buffer beginning at an
offset of 1 MB
COMMAND / RESPONSE (none):
sf -o=100000 -l=10000