Manual

Chapter 1 Introduction VM62(A) / VM42(A) User’s Manual
1.2 Ordering Information
Name Description Order No
VM62-BASE VMEbus single board computer comprising MC68060 @ 50 MHz,
MC68EN360 @ 25 MHz, 256 kByte dual-ported SRAM (with Gold Cap for
backup), configured for use with the AutoBahn interface piggyback, up to 6
serial interfaces (2 available on the front panel as RS232 and an additional 4
divided between the CXC interface and SI-Interface), CXC Interface, PEPbug.
12349
VM62-BASE Same as order no. 12349 but with 1 MByte dual-ported SRAM 12350
VM42-BASE VMEbus single board computer comprising MC68040 @ 33 MHz,
MC68EN360 @ 33 MHz, 256 kByte dual-ported SRAM (with Gold Cap for
backup), configured for use with the AutoBahn interface piggyback, 6 serial
interfaces (2 available on the front panel as RS232 and an additional 4 divided
between the CXC interface and SI-Interface), CXC Interface, PEPbug.
12344
VM42-BASE Same as order no. 12344 but with 1 MByte dual-ported SRAM 12345
VM42-BASE Same as order no. 12344 but with MC68040V @ 33 MHz (3.3-V technology) 12346
VM42-BASE Same as order no. 12346 but with 1 MByte dual-ported SRAM 12347
DM600 Memory piggyback with 4 MByte DRAM and 1 MByte Flash EPROM 11852
DM600 Memory piggyback with 4 MByte DRAM and 4 MByte Flash EPROM 11853
DM601 Memory piggyback with 16 MByte DRAM and 1 MByte Flash EPROM 11854
DM601 Memory piggyback with 16 MByte DRAM and 4 MByte Flash EPROM 11855
DM602 Memory piggyback with 1 MByte DRAM and 1 MByte Flash EPROM 12765
DM603 Memory piggyback with 32 MByte DRAM and 512 kByte Flash EPROM 13027
DM603 Memory piggyback with 32 MByte DRAM and 2 MByte Flash EPROM 13627
SI-10B2 10Base2 (Thin) Ethernet (cheapernet) interface with RG58 (coax) connector 9925
SI-10B5 10Base5 (AUI) Ethernet interface piggyback with 15-pin D-Sub connector 9924
SI-10BT 10BaseT (Twisted pair) Ethernet interface piggyback with RJ45 connector 9926
SI-DUMMY Front panel only fitted when no SI piggyback required 12351
SI-PB232 Serial interface piggyback for 2 RS232 connections (Modem interface) with 2
RJ45 connectors
11850
SI-PB232-ISO Serial interface piggyback for 1 RS232 optoisolated connection with 1 RJ45
connector (Available in 1996 if requested)
11851
SI-PBPRO RS485 optoisolated interface piggyback for 2 wire half-duplex (PROFIBUS)
connection with 9-pin D-Sub connector
9927
MP-AB100 AutoBahn interface piggyback complete with all control logic, 128 kByte 32-
bit fast SRAM as buffer for AutoBahn data transfer with Spanceiver MC
100SX1451 of 50/100 MByte/s
9923
CABLE-VM42-
232
3 meter RS232 Serial Interface cable for VM42(A) / VM62(A) with 9-pin
female D-Sub (PC pinout) to RJ12 connector
12383
Page 1-2 © 1995 PEP Modular Computers May 17, 1996