Owner manual

Appendix SI6 Piggybacks
Page SI6- 4
© PEP Modular Computers
Juli 23, 1997
3 SI6-10BT
The SI6-10BT is a physical twisted pair (10BaseT) interface to the 68EN360 Controller chip. It connects one of the range
of PEP CPU boards to an unshielded 100Ω twisted pair cable via an RJ45 telephone jack.
The SI6-10BT has two LEDs fitted; a red LED indicates collision detection and a yellow LED for data.
3.1 Specifications
3.2 Connector
On-board termination
Max. Baud Rate
100Ω
10 Mbit/s as specified by Ethernet
Pin No. Signal
1
TD+
2
TD+
3
RD+
4
Not connected
5
Not connected
6
RD-
7
Not connected
8
Not connected
Col Tx
10BaseT
ETHERNET
Collision
Data
RJ45 Connector
Pin 1
Pin 8