Manual

ManualsBrandsKontron ManualsHardwareKT965 Series

KT965 Family

KTD-00699-S Public User Manual Date: 2010-04-15 Page 1 of 90

KT965/Flex

KT965/ATXP

KT965/ATXE

User Manual

for the Motherboards:

Summary of content (90 pages)

PAGE 1
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 1 of 90 User Manual for the Motherboards: KT965/Flex KT965/ATXP KT965/ATXE
PAGE 2
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 2 of 90 Document revision history. Revision Date By S April 15th 2010 MLA R Oct. 19th 2009 MLA Q Oct. 13th 2009 MLA P June 9th 2009 MLA O Dec. 10th 2008 MLA N May 30th 2008 MLA M April 22nd 2008 MLA L April 2nd 2008 MLA K Mar. 6th 2008 MLA J Jan. 2nd 2008 MLA 0-I Oct. 17th, 2007 MLA Comment Updated Voltage Monitor read out. Updated warning info to installation guide. APM information corrected.
PAGE 3
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 3 of 90 Life Support Policy KONTRON Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF THE GENERAL MANAGER OF KONTRON Technology A/S. As used herein: 1.
PAGE 4
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 4 of 90 Table of contents: 1. INTRODUCTION .....................................................................................................................................7 2. INSTALLATION PROCEDURE ..............................................................................................................8 2.1 Installing the board................................................................................................
PAGE 5
KT965 Family KTD-00699-S 4.8.1 4.8.2 Public User Manual Date: 2010-04-15 Page 5 of 90 Com1 (Port1) DB9 Connector. ...................................................................................................38 Com2 Pin Header Connector. ....................................................................................................38 4.9 Ethernet connectors. .......................................................................................................................39 4.9.
PAGE 6
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 6 of 90 Advanced Menu................................................................................................................................64 8.3 8.3.1 Advanced settings – CPU Configuration ....................................................................................65 8.3.2 Advanced settings – IDE Configuration......................................................................................66 8.3.
PAGE 7
KT965 Family KTD-00699-S 1. Public User Manual Date: 2010-04-15 Page 7 of 90 Introduction This manual describes the KT965/Flex, KT965/ATXP and KT965/ATXE boards made by KONTRON Technology A/S. The boards will also be denoted KT965 family if no differentiation is required. All boards are to be used with the Intel® Core™2 Quad, Intel® Core™2 Duo, Intel® Pentium® 4 and the Intel® Celeron® D Processors. These belong to the Intel Conroe and Cedar Mill processor families.
PAGE 8
KT965 Family KTD-00699-S 2. Public User Manual Date: 2010-04-15 Page 8 of 90 Installation procedure 2.1 Installing the board To get the board running, follow these steps. In some cases the board shipped from KONTRON Technology has CPU, DDR DRAM and Cooler mounted. In this case Step 2-4 can be skipped. 1. Turn off the power supply ! Warning: Turn off PSU (Power Supply Unit) completely (no mains power connected to the PSU) or leave the Power Connectors unconnected while configuring the board.
PAGE 9
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 9 of 90 Visually inspect protective cover for damage If damage observed, replace the cover. NOTE: After cover removal, make sure socket load plate and contacts are free of foreign material. Debris may be removed with compressed air. NOTE: Removing protective cover after CPU insertion will compromise the ability to visually inspect socket. Processor Installation Locate Connection 1 indicator and the two orientation key notches.
PAGE 10
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 10 of 90 2.
PAGE 11
KT965 Family KTD-00699-S 3. Public User Manual Date: 2010-04-15 Page 11 of 90 System specification 3.1 Component main data The table below summarises the features of the KT965/Flex, KT965/ATXP and KT965/ATXE embedded motherboards.
PAGE 12
KT965 Family KTD-00699-S I/O Control Peripheral interfaces LAN Support BIOS Expansion Capabilities Hardware Monitor Subsystem Operating Systems Support Public User Manual Date: 2010-04-15 Page 12 of 90 Winbond W83627DHG LPC Bus I/O Controller • Eight USB 2.0 ports on I/O area • Two USB 2.
PAGE 13
KT965 Family KTD-00699-S Environmental Conditions Public User Manual Date: 2010-04-15 Page 13 of 90 Operating: 0°C – 50°C operating temperature (forced cooling). It is the customer’s responsibility to provide sufficient airflow around each of the components to keep them within allowed temperature range.
PAGE 14
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 14 of 90 3.2 System overview The block diagram below shows the architecture and main components of the KT965 boards. The two key components on the board are the Intel® Q965 and Intel® ICH8DO Embedded Chipsets. Components shown shaded are optional depending on board type (KT965/Flex, /ATXP or /ATXE) and variants of the board.
PAGE 15
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 15 of 90 3.3 Processor support table. The KT965/Flex, /ATXP and /ATXE are designed to support the following LGA775 processors: Intel® Core™2 Quad Processor Intel® Core™ 2 Duo Processor Intel® Pentium® 4 Processor Intel® Celeron®, Intel® Celeron® D Processor Processor Brand Clock Speed [GHz] Bus Speed [MHz] Processor Number sSpec no. Thermal Guideline [Watt] Cache Embedded 2.66 1066 Q6700 SLACQ 95 8M No 2.
PAGE 16
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 16 of 90 3.4 System Memory support The KT965 boards have four onboard DDR2 DIMM sockets and support the following memory features: • • • • • • • • • 1.
PAGE 17
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 17 of 90 Flex mode. This mode provides the most flexible performance characteristics. The bottommost DRAM memory (the memory that is lowest within the system memory map) is mapped to dual channel operation; the topmost DRAM memory (the memory that is nearest to the 8 GB address space limit), if any, is mapped to single channel operation.
PAGE 18
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 18 of 90 3.5 KT965 Graphics Subsystem The KT965 boards use the Intel Q965 Express chipset for the graphical control. This chipset contains two separate, mutually exclusive graphics options. Either the GMA 3000 graphics controller (contained within the 82Q965 GMCH) is used, or a PCI Express x16 add-in card can be used. When a PCI Expressx16 add-in card is installed, the GMA 3000 graphics controller is disabled. 3.5.
PAGE 19
KT965 Family KTD-00699-S 3.5.3 Public User Manual Date: 2010-04-15 Page 19 of 90 Advanced Digital Display (ADD2) card Support The KT965 board routes two multiplexed SDVO ports that are each capable of driving up to a 200 MHz pixel clock to the PCI Express x16 connector. The SDVO ports can be paired for a dual channel configuration to support up to a 400 MHz pixel clock.
PAGE 20
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 20 of 90 3.
PAGE 21
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 21 of 90
PAGE 22
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 22 of 90 3.7 Power Consumption In order to ensure safe operation of the board, the ATX power supply must monitor the supply voltage and shut down if the supplies are out of range – refer to the hardware manual for actual power specification.
PAGE 23
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page KT965/Flex board mounted w/ 2.13GHz Core Duo & 1GB DDR2 Ram test results: Test DOS, Idle, mean Supply +12V +5V +3V3 -12V 5VSB WinXP, 3DMARK2000 & CPUBURN, mean +12V +5V +3V3 -12V 5VSB WinXP, 3DMARK2000 & CPUBURN, peak +12V +5V +3V3 -12V 5VSB S1, mean +12V +5V +3V3 -12V 5VSB S3, mean +12V +5V +3V3 -12V 5VSB S4, mean +12V +5V +3V3 +-12V 5VSB Inrush, peak +12V +5V +3V3 -12V 5VSB Current draw 1.51A 1.48A 2.86A 0.
PAGE 24
KT965 Family KTD-00699-S Public User Manual 3.
PAGE 25
KT965 Family KTD-00699-S 4. Public User Manual Date: 2010-04-15 Page 25 of 90 Connector Definitions The following sections provide pin definitions and detailed description of all on-board connectors. . The connector definitions follow the following notation: Column name Description Pin Shows the pin-numbers in the connector. The graphical layout of the connector definition tables is made similar to the physical connectors. Signal The mnemonic name of the signal at the current pin.
PAGE 26
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 26 of 90 4.1 Connector layout 4.1.
PAGE 27
KT965 Family KTD-00699-S 4.1.
PAGE 28
KT965 Family KTD-00699-S 4.1.
PAGE 29
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 29 of 90 4.2 Power Connector (ATXPWR) The KT965 boards are designed to be supplied from a standard ATX or BTX power supply.
PAGE 30
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 30 of 90 4.3 Keyboard and PS/2 mouse connectors Attachment of a keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector (MSE & KBD). Both interfaces utilize open-drain signaling with on-board pull-up. The PS/2 mouse and keyboard is supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states.
PAGE 31
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 31 of 90 4.4 Display Connectors The KT965 board family provides onboard Analog CRT interface. Addtionally the KT965 boards provides support for ADD2 cards through the onboard PCI Express x16 connector, with extension capability for support of DVI, LVDS, VGA, HDMI/UDI, TV-Out, etc. If a PCI Express x16 Graphics add-in card is used, the onboard Graphics controller (GMA 3000) is disabled. 4.4.
PAGE 32
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 32 of 90 4.5 PCI-Express Connectors The KT965 boards contains one 16-lane (x16) PCI Express port intended for an external PCI Express graphics card. The PCI Express port is compliant to the PCI Express* Base Specification revision 1.1. The x16 port operates at a frequency of 2.5 Gb/s on each lane while employing 8b/10b encoding; the port supports a maximum theoretical bandwidth of 40 Gb/s in each direction.
PAGE 33
KT965 Family KTD-00699-S Public User Manual PRSNT#2 GND PEG_TXP[7] PEG_TXN[7] GND GND PEG_TXP[6] PEG_TXN[6] GND GND PEG_TXP[5] PEG_TXN[5] GND GND PEG_TXP[4] PEG_TXN[4] GND GND PEG_TXP[3] PEG_TXN[3] GND GND PEG_TXP[2] PEG_TXN[2] GND GND PEG_TXP[1] PEG_TXN[1] GND GND PEG_TXP[0] PEG_TXN[0] GND NC NC 4.5.
PAGE 34
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 34 of 90 (continues) NC NC GND NC NC GND GND NC NC GND GND NC NC GND GND NC NC GND NC GND NC NC GND GND NC NC GND GND NC NC GND GND NC NC GND GND NC NC GND GND NC NC GND GND NC NC GND GND NC NC GND NC NC B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 A30 A31 A32 A33 A34 A3
PAGE 35
KT965 Family KTD-00699-S 4.5.3 Public User Manual Date: 2010-04-15 Page 35 of 90 miniPCI-Express connector The KT965/ATXP board supports one miniPCI Express port compliant to the Mini PCI Specification, Revision 1.0. This allows for implementation for small form factor PCI cards also referred to as Mini PCI Cards. Note Type Signal PIN Signal WAKE# NC NC NC GND PCIE_mini CLK# PCIE_mini CLK GND 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 +3V3 GND +1.
PAGE 36
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 36 of 90 4.6 Serial ATA harddisk interface The KT965 boards have an integrated SATA Host controller that supports independent DMA operation on six ports and data transfer rates of up to 3.0Gb/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0, 1, 5 and 10 (Linux O/S only support for RAID 0 and 1).
PAGE 37
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 37 of 90 4.7 Printer Port Connector (PRINTER).
PAGE 38
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 38 of 90 4.8 Serial Ports Two RS232 serial ports are available on the KT965 boards The typical interpretation of the signals in the COM ports is as follows: Signal Description TxD Transmitte Data, sends serial data to the communication link. The signal is set to a marking state on hardware reset when the transmitter is empty or when loop mode operation is initiated.
PAGE 39
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 39 of 90 4.9 Ethernet connectors. The KT965 boards supports 2 channels of 10/100/1000Mb Ethernet RTL8111B LAN controllers. In order to achieve the specified performance of the Ethernet port, Category 5 twisted pair cables must be used with 10/100MB and Category 5E, 6 or 6E with 1Gb LAN networks. The signals for the Ethernet ports are as follows: Signal Description MDI[0]+ In MDI mode, this is the first pair in 1000Base-T, i.e.
PAGE 40
KT965 Family KTD-00699-S 4.9.2 Public User Manual Date: 2010-04-15 Page Ethernet connector 2 (ETHER2) Ethernet connector 2 is mounted together with USB Ports 4 and 5.
PAGE 41
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 41 of 90 4.10 USB Connector (USB) The KT965 boards contains two Enhanced Host Controller Interface (EHCI) host controllers that supports USB 2.0 allowing data transfers up to 480Mb/s. The KT965 boards also contains five Universal Host Controller Interface (UHCI Revision 1.1) controllers that support USB full-speed and low-speed signaling. The KT965 boards supports a total of ten USB 2.0 ports.
PAGE 42
KT965 Family KTD-00699-S 4.10.2 Public User Manual Date: 2010-04-15 Page 42 of 90 USB Connector 4/5 (USB4/5) USB Ports 4 and 5 are mounted together with ETHER2. Note Pull U/D Ioh/Iol Type Signal 1 1 /15K 0.25/2 PWR IO /15K 0.25/2 PWR IO 2 3 Signal Type Ioh/Iol Pull U/D GND USB5+ PWR IO 0.25/2 /15K GND USB4+ PWR IO 0.25/2 /15K Note 4 5V/SB5V USB51 1 PIN 2 3 4 5V/SB5V USB4- Note 1: The 5V supply for the USB devices is on-board fused with a 2.0A reset-able fuse.
PAGE 43
KT965 Family KTD-00699-S 4.10.4 Public User Manual Date: 2010-04-15 Page 43 of 90 USB Connector 8/9 (USB8/9) USB Ports 8 and 9 are available on the I/O frontpanel. Note Pull U/D Ioh/Iol Type Signal 1 1 /15K 0.25/2 PWR IO /15K 0.25/2 PWR IO 5V/SB5V USB9- 2 3 Signal Type Ioh/Iol Pull U/D GND USB8+ PWR IO 0.25/2 /15K GND USB9+ PWR IO 0.25/2 /15K Note 4 5V/SB5V USB81 1 PIN 2 3 4 Note 1: The 5V supply for the USB devices is on-board fused with a 2.0A reset-able fuse.
PAGE 44
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 44 of 90 4.11 Audio Connector The onboard Audio circuit implements 7.1+2 Channel High Definition Audio with UAA (Universal Audio Architecture), featuring five 24-bit stereo DACs and three 20-bit stereo ADCs. 4.11.1 Audio Line-in, Line-out and Microphone Audio Line-in, Line-out and Microphone are available in the stacked audio jack connector. Below is shown audio stack configuration when configured for 8-channel audio.
PAGE 45
KT965 Family KTD-00699-S 4.11.2 Public User Manual Date: 2010-04-15 Page 45 of 90 CD-ROM Audio input (CDROM) CD-ROM audio input may be connected to this connector. It may also be used as a secondary line-in signal. PIN Signal Type Ioh/Iol 1 2 3 4 CD_Left CD_GND CD_GND CD_Right IA IA IA IA - Pull U/D - Note 1 1 Note 1: The definition of which pins are use for the Left and Right channels is not a worldwide accepted standard. Some CDROM cable kits expect reverse pin order.
PAGE 46
KT965 Family KTD-00699-S 4.11.
PAGE 47
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 47 of 90 4.12 Fan connectors , FAN_CPU and FAN_SYS. The FAN_CPU is used for connection of the active cooler for the CPU. The FAN_SYS can be used to power, control and monitor a fan for chassis ventilation etc. The 4pin header supports connection of 3-pin FANs, but it is recommended to use the 4-pin type for optimized FAN speed control. The 3- or 4-pin mode is controlled in the BIOS setup menu.
PAGE 48
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 48 of 90 4.13 The Clear CMOS Jumper, Clr-CMOS. The Clr-CMOS Jumper is used to clear the CMOS content. ↑ CPU location ↑ No Jumper installed 1 3 (Pin numbers) • Jumper normal position Jumper in Clear CMOS position 2 • To clear all CMOS settings, including Password protection, move the CMOS_CLR jumper (with or without power on the system) for approximately 1 minute.
PAGE 49
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 49 of 90 4.14 TPM connector (unsupported). Note Pull U/D - Ioh/Iol - Type PWR PWR Signal LPC CLK LPC FRAME# LPC RST# LPC AD3 +3V3 LPC AD0 SMB_CLK SB3V3 GND SUS_STAT# PIN 1 3 5 7 9 11 13 15 17 19 2 6 8 10 12 14 16 18 20 Signal GND KEY +5V LPC AD2 LPC AD1 GND SMB_DATA LPC SERIRQ CLKRUN# LPC IRQ# Type Ioh/Iol Pull U/D Note Signal SB3V3 BOOT0 BOOT1 MFG GND Type Ioh/Iol Pull U/D Note 4.15 SPI connector (unsupported).
PAGE 50
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 50 of 90 4.16 Front Panel connector (FRONTPNL).
PAGE 51
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 51 of 90 4.
PAGE 52
KT965 Family KTD-00699-S 4.18 Public User Manual Date: 2010-04-15 Page 52 of 90 Note PCI Slot Connector Terminal Note Type Signal S C Signal Type PWR O PWR I PWR PWR I I I I OT PWR PWR O PWR O PWR I PWR IOT IOT PWR IOT IOT PWR IOT IOT PWR IOT IOT PWR IOT IOT PWR IOT PWR IOT PWR IOT IOT PWR IOC PWR IOT IOT PWR IOT IOT PWR -12V TCK GND TDO +5V +5V INTB# INTD# REQ2# REQ3# GNT2# GND GND CLKA GND CLKB GND REQ0# +5V (I/O) AD31 AD29 GND AD27 AD25 +3.3V C/BE3# AD23 GND AD21 AD19 +3.
PAGE 53
KT965 Family KTD-00699-S 4.18.1 Public User Manual Date: 2010-04-15 Page 53 of 90 Signal Description –PCI Slot Connector SYSTEM PINS Clock provides timing for all transactions on PCI and is an input to every PCI device. All other PCI signals, CLK except RST#, INTA#, INTB#, INTC#, and INTD#, are sampled on the rising edge of CLK and all other timing parameters are defined with respect to this edge. PCI operates at 33 MHz.
PAGE 54
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 54 of 90 ARBITRATION PINS (BUS MASTERS ONLY) Request indicates to the arbiter that this agent desires use of the bus. This is a point to point signal. Every REQ# master has its own REQ# which must be tri-stated while RST# is asserted. Grant indicates to the agent that access to the bus has been granted. This is a point to point signal. Every GNT# master has its own GNT# which must be ignored while RST# is asserted.
PAGE 55
KT965 Family KTD-00699-S 4.18.
PAGE 56
KT965 Family KTD-00699-S 5. Public User Manual Date: 2010-04-15 Page 56 of 90 Onboard Connectors Onboard Connectors Connector Mating Connectors Manufacturer Type no. Manufacturer Type no.
PAGE 57
KT965 Family KTD-00699-S 6. Public User Manual Date: 2010-04-15 Page System Ressources 6.
PAGE 58
KT965 Family KTD-00699-S 6.
PAGE 59
IRQ NMI IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9 IRQ10 IRQ11 IRQ12 IRQ13 IRQ14 IRQ15 IRQ16 IRQ17 IRQ18 IRQ19 IRQ20 IRQ21 IRQ22 IRQ23 IRQ24 IRQ25 IRQ26 • • • • • • • • • • • • • Available on PCI slots as IRQA-IRQD depending on selections in the BIOS User Manual May be used by onboard SMBus Controller May be used by onboard VGA Controller May be used by onboard Ethernet controller 2 May be used by onboard Ethernet controller 1 May be used by onboard USB controller May be used for PCI E
PAGE 60
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 6.
PAGE 61
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 6.
PAGE 62
KT965 Family KTD-00699-S 7. Public User Manual Date: 2010-04-15 Page 62 of 90 Overview of BIOS features This Manual section details specific BIOS features for the KT965 boards. The KT965 boards are based on the AMI BIOS core version 8.10 with Kontron BIOS extensions. 7.1 System Management BIOS (SMBIOS / DMI) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network.
PAGE 63
KT965 Family KTD-00699-S 8. Public User Manual Date: 2010-04-15 Page 63 of 90 BIOS Configuration / Setup 8.1 Introduction The BIOS Setup is used to view and configure BIOS settings for the KT965 board. The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins.
PAGE 64
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 64 of 90 8.3 Advanced Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Advanced Settings Chipset Exit Configure CPU. Warning: Setting wrong values in below sections may cause system to malfunction.
PAGE 65
KT965 Family KTD-00699-S 8.3.1 Public User Manual Date: 2010-04-15 Page 65 of 90 Advanced settings – CPU Configuration BIOS SETUP UTILITY Advanced Maximum: CPU Speed is set to maximum. Minimum: CPU Speed is set to minimum. Automatic: CPU speed controlled by Operating system. Disabled: Default CPU speed. Configure advanced CPU settings Module Version: 3F.07 Manufacturer: Intel Intel® Core (TM)2 CPU Frequency : 2.
PAGE 66
KT965 Family KTD-00699-S 8.3.
PAGE 67
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 67 of 90 BIOS SETUP UTILITY Advanced Select the type of devices connected to the system Primary IDE Master Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA S.M.A.R.T. :Hard Disk :ST340014A :40.0GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-5 :Supported Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.T.
PAGE 68
KT965 Family KTD-00699-S 8.3.3 Public User Manual Date: 2010-04-15 Page 68 of 90 Advanced settings – LAN Configuration BIOS SETUP UTILITY Advanced Control of Ethernet Devices and PXE boot LAN Configuration ETH1 Configuration (Right) MAC Address ETH2 Configuration (Left) MAC Address [Enabled] : 00E0F4000001 100MB* [Enabled] : 00E0F4000002 - <|| +F1 F10 ESC Select Screen Select Item change option General Help Save and Exit Exit v02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
PAGE 69
KT965 Family KTD-00699-S 8.3.4 Public User Manual Date: 2010-04-15 Page 69 of 90 Advanced settings – Super IO Configuration BIOS SETUP UTILITY Advanced Allows BIOS to Select Serial Port1 Base Addresses.
PAGE 70
KT965 Family KTD-00699-S 8.3.
PAGE 71
KT965 Family KTD-00699-S 8.3.6 Public User Manual Date: 2010-04-15 Page 71 of 90 Advanced settings – Voltage Monitor BIOS SETUP UTILITY Advanced Voltage Monitor Requested Core Vcore :1.2750 V :1.248 V AVCC 3VCC +12Vin -12Vin +5Vin Core 1.8 V Core 1.5 V VSB VBAT :3.232 V :3.232 V :12.083 V :Good :5.165 V :1.808 V :1.496 V :3.264 V :3.104 V Enable Hardware Health Monitoring Device. <|| +F1 F10 ESC Select Screen Select Item change option General Help Save and Exit Exit v02.
PAGE 72
KT965 Family KTD-00699-S 8.3.7 Public User Manual Date: 2010-04-15 Page 72 of 90 Advanced settings – ACPI Configuration BIOS SETUP UTILITY Advanced Enable RSDP pointers To 64-bit Fixed System Description Tabled. Different ACPI version has some addition. ACPI Settings ACPI Version Features Repost Video on S3 Resume PS/2 Kbd/Mouse S4/S5 Wake Keyboard Wake Hotkey USB Device Wakeup From S3/S4 [V1.
PAGE 73
KT965 Family KTD-00699-S 8.3.8 Public User Manual Date: 2010-04-15 Page 73 of 90 Advanced settings – APM Configuration BIOS SETUP UTILITY Advanced Enable or disable APM. APM Configuration Power Management/APM Advanced Resume Resume Resume [Enabled] Resume Event Controls On Ring [Disabled] On PME# [Disabled] On RTC Alarm [Disabled] <|| +F1 F10 ESC Select Screen Select Item change option General Help Save and Exit Exit v02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
PAGE 74
KT965 Family KTD-00699-S 8.3.9 Public User Manual Date: 2010-04-15 Page 74 of 90 PCI Express Configuration BIOS SETUP UTILITY Advanced Enable/Disable PCI Express L0s and L1 link power states. PCI Express Configuration Active State Power-Management [Disabled] <|| +F1 F10 ESC Select Screen Select Item change option General Help Save and Exit Exit v02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
PAGE 75
KT965 Family KTD-00699-S 8.3.10 Public User Manual Date: 2010-04-15 Page 75 of 90 Advanced settings – Remote Access Configuration BIOS SETUP UTILITY Advanced Select Remote Access type.
PAGE 76
KT965 Family KTD-00699-S 8.3.11 Public User Manual Date: 2010-04-15 Page 76 of 90 Advanced settings – TCG/TPM support BIOS SETUP UTILITY Advanced Enable/Disable TPM TCG (TPM 1.1/1.2) support in BIOS Trusted Computing TCG/TPM SUPPORT [Yes] Execute TPM Command Clearing the TPM TPM Enable/Disable Status TPM Owner Status [Don’t change] [Press Enter] [No State] [No State] <|| +F1 F10 ESC Select Screen Select Item change option General Help Save and Exit Exit v02.
PAGE 77
KT965 Family KTD-00699-S 8.3.12 Public User Manual Date: 2010-04-15 Page 77 of 90 Advanced settings – USB Configuration BIOS SETUP UTILITY Advanced Enables support for legacy USB. AUTO option disables if no USB Devices are connected. USB Configuration Module Version – 2.24.0-12.4 USB Devices Enabled : 1 Drive Legacy USB Support USB 2.
PAGE 78
KT965 Family KTD-00699-S 8.3.13 Public User Manual Date: 2010-04-15 Page 78 of 90 Advanced settings – USB Mass Storage Device Configuration BIOS SETUP UTILITY Advanced Number of seconds POST waits for the USB mass storage device after start unit command.
PAGE 79
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 79 of 90 8.4 PCIPnP Menu BIOS SETUP UTILITY PCIPnP Advanced PCI/PnP Settings Warning: Setting wrong values in below sections May cause system to malfunction. Plug & Play O/S Allocate IRQ to PCI VGA PCI Slot-2 IRQ Preference [No] [Yes] [Auto] NO: lets the BIOS configure all the devices in the system.
PAGE 80
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 80 of 90 8.5 Boot Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Settings Boot Security Chipset Exit Configure Settings during System Boot. ► Boot Settings Configuration ► Boot Device Priority <|| Enter F1 F10 ESC Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit v02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
PAGE 81
KT965 Family KTD-00699-S 8.5.1 Public User Manual Date: 2010-04-15 Page 81 of 90 Boot – Boot Settings Configuration BIOS SETUP UTILITY Boot Configure Settings during System Boot.
PAGE 82
KT965 Family KTD-00699-S Public Note: List of errors: Pressed Timer Error Interrupt Controller-1 error Keyboard/Interface Error Halt on Invalid Time/Date NVRAM Bad 8.5.2 User Manual Date: 2010-04-15 Primary Master Hard Disk Error S.M.A.R.
PAGE 83
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 83 of 90 8.6 Security Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Install or Change the password.
PAGE 84
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 84 of 90 8.7 Chipset Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Advanced Chipset Settings Chipset Exit Configures North Bridge features. Warning: Setting wrong values in below sections may cause system to malfunction. ► North Bridge Configuration ► South Bridge Configuration <|| Enter F1 F10 ESC Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit v02.
PAGE 85
KT965 Family KTD-00699-S 8.7.
PAGE 86
KT965 Family KTD-00699-S 8.7.2 Public User Manual Date: 2010-04-15 Page 86 of 90 Advanced Chipset Settings – Video Function Configuration BIOS SETUP UTILITY Chipset Video Function Configuration DVMT Mode Select DVMT/ Fixed Memory [DVMT Mode] [256MB] Boot Type: EDID Support SDVO [AUTO] [Enabled] [N/A] Fixed Mode DVMT Mode <|| Enter F1 F10 ESC Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit v02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
PAGE 87
KT965 Family KTD-00699-S 8.7.3 Public User Manual Date: 2010-04-15 Page 87 of 90 Advanced Chipset Settings – SouthBridge Configuration BIOS SETUP UTILITY Chipset South Bridge Chipset Configuration USB Functions USB 2.0 Controller HAD Controller Audio Jack Sensing SMBUS Controller [10 USB Ports] [Enabled] [Enabled] [Auto] [Enabled] SLP_S4# Min.
PAGE 88
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 88 of 90 8.8 Exit Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Exit system setup after saving the changes. Exit Options Save Changes and Exit Discard Changes and Exit Discard Changes F10 Key can be used for this operation.
PAGE 89
KT965 Family KTD-00699-S Public User Manual Date: 2010-04-15 Page 89 of 90 8.9 AMI BIOS Beep Codes Boot Block Beep Codes: Number of Description Beeps 1 Insert diskette in floppy drive A: 2 ‘AMIBOOT.
PAGE 90
KT965 Family KTD-00699-S 9. Public User Manual Date: 2010-04-15 Page 90 of 90 OS setup Use the Setup.exe files for all relevant drivers. The drivers can be found on KT965 Driver CD or they can be downloaded from the homepage http://emea.kontron.com/ Note: When installing/using ADD2 it is possible that the OS start up without any connected display(s) active. If you are able to pass the "Log On to Windows" etc. by entering the password etc.