User guide

Functional Description CP932
Page 2 - 8 © 2005 Kontron Modular Computers GmbH ID 30048, Rev. 01
30048.01.UG.VC.050622/191301
P R E L I M I N A R Y
2.5.2 CompactPCI Interface
The CP932 is equipped with one 2 mm x 2 mm pitch, 32-bit, female, CompactPCI connector,
J1, with support for PCI bus signals, arbitration, clock and power.
The CP932 is designed for a CompactPCI bus architecture. The CompactPCI standard is elec-
trically identical to the PCI local bus. However, these systems are enhanced to operate in rug-
ged industrial environments and to support multiple slots.
The CompactPCI interface is based on the specification PICMG 2.0 R 3.0, 10/1/99. The follow-
ing figure and table indicate the pin layout and pinout of the CompactPCI connector, J1.
Figure 2-3: CompactPCI Connector J1
Table 2-2: CompactPCI Connector J1 Pinout
PIN ROW A ROW B ROW C ROW D ROW E ROW F
25+5VNCNCNC+5V GND
24 AD[1] +5V V(I/O) AD[0] NC GND
23 NC AD[4] AD[3] +5V AD[2] GND
22 AD[7] GND NC AD[6] AD[5] GND
21 NC AD[9] AD[8] M66EN C/BE[0]# GND
20 AD[12] GND V(I/O) AD[11] AD[10] GND
19 NC AD[15] AD[14] GND AD[13] GND
18 SERR# GND NC PAR C/BE[1]# GND
17 NC NC NC GND PERR# GND
16 DEVSEL# GND V(I/O) STOP# LOCK# GND
15 NC FRAME# IRDY# GND TRDY# GND
12-14 Key Area
11 AD[18] AD[17] AD[16] GND C/BE[2]# GND
10 AD[21] GND NC AD[20] AD[19] GND
9 C/BE[3]# IDSEL AD[23] GND AD[22] GND
8 AD[26] GND V(I/O) AD[25] AD[24] GND
7 AD[30] AD[29] AD[28] GND AD[27] GND
6 REQ# GND NC CLK AD[31] GND
5NCNCRST#GNDGNT#GND
4NCNCV(I/O)NCNC GND
3 INTA# NC NC +5V NC GND
2NC +5V NC TDO TDI GND
1 +5V NC NC NC +5V GND
Note ...
On the five-channel variant of the CP932, the PCI signals are not connected.
Note:
Pinrow F
comprises
GND pins.
25
AEC
1
DBF