CP6004X-SA 6U CompactPCI Processor Board based on the 3rd Generation Intel® Core™ i7 Processor with the Intel® QM77 Express Chipset Doc. ID: 1054-1227, Rev. 1.0 February 1, 2013 If it’s embedded, it’s Kontron.
Preface CP6004X-SA Revision History DRAFT — FOR INTERNAL USE ONLY Publication Title: CP6004X-SA: 6U CompactPCI Processor Board based on the 3rd Generation Intel® Core™ i7 Processor with the Intel® QM77 Express Chipset Doc. ID: 1054-1227 Rev. 1.0 Brief Description of Changes Date of Issue Initial issue 1-Feb-2013 Imprint Kontron Europe GmbH may be contacted via the following: MAILING ADDRESS TELEPHONE AND E-MAIL Kontron Europe GmbH +49 (0) 800-SALESKONTRON Sudetenstraße 7 sales@kontron.
CP6004X-SA Preface Revision History .........................................................................................................ii Imprint ........................................................................................................................ii Disclaimer ..................................................................................................................ii Table of Contents .........................................................................................
Preface 2. CP6004X-SA Functional Description ............................................................ 2 - 3 2.1 Processor .................................................................................................2 - 3 DRAFT — FOR INTERNAL USE ONLY 2.2 Memory ....................................................................................................2 - 4 2.3 Intel® QM77 Express Chipset .................................................................2 - 4 2.4 Timer ..................
CP6004X-SA Preface 2.10.11.4 Hot Swap Support ................................................................ 2 - 18 2.10.11.5 Power Ramping .................................................................... 2 - 18 2.10.11.7 Handle Switch ...................................................................... 2 - 18 2.10.11.8 ENUM# Interrupt .................................................................. 2 - 18 2.10.11.9 Hot Swap LED ...................................................................
Preface 4.1.2 CP6004X-SA DIP Switch SW2 Configuration .......................................................4 - 4 4.2 Jumper Description ..................................................................................4 - 5 DRAFT — FOR INTERNAL USE ONLY 4.3 I/O Address Map ......................................................................................4 - 5 4.4 CP6004X-SA-Specific Registers .............................................................4 - 6 4.4.1 Status Register 0 (STAT0) ....
Preface 5.2.1 Power Consumption of the CP6004X-SA Accessories ................... 5 - 8 5.2.2 Power Consumption per Gigabit Ethernet Port ............................... 5 - 8 5.2.3 Power Consumption per 10 Gigabit Ethernet Port .......................... 5 - 8 5.3 Maximum Power Consumption of XMC Modules .................................... 5 - 8 6. Thermal Considerations ......................................................... 6 - 3 6.1 Board Internal Thermal Monitoring .........................
DRAFT — FOR INTERNAL USE ONLY Preface CP6004X-SA This page has been intentionally left blank. Page viii ID 1054-1227, Rev. 1.
CP6004X-SA Preface 1-1 CP6004X-SA Main Specifications ........................................................... 1 - 10 1-2 Standards ................................................................................................ 1 - 16 1-3 Related Publications ................................................................................ 1 - 17 2-1 Intel® Core™ i7-3615QE Processor Features ......................................... 2 - 4 2-2 IPMI and Hot Swap LEDs Function ...................
DRAFT — FOR INTERNAL USE ONLY Preface CP6004X-SA 4-2 DIP Switch SW2 for CompactPCI Interface Configuration ......................... 4 - 4 4-3 I/O Address Map ........................................................................................ 4 - 5 4-4 Status Register 0 (STAT0) .......................................................................... 4 - 6 4-5 Status Register 1 (STAT1) ..........................................................................
CP6004X-SA Preface 1-1 CP6004X-SA Functional Block Diagram .................................................. 1 - 6 1-2 CP6004X-SA Front Panel ........................................................................ 1 - 7 1-3 CP6004X-SA Board Layout – Top View .................................................. 1 - 8 1-4 CP6004X-SA Board Layout – Bottom View ............................................. 1 - 9 2-1 USB Connectors J6 and J7 ............................................................
DRAFT — FOR INTERNAL USE ONLY Preface CP6004X-SA This page has been intentionally left blank. Page xii ID 1054-1227, Rev. 1.
CP6004X-SA Preface This document contains information proprietary to Kontron. It may not be copied or transmitted by any means, disclosed to others, or stored in any retrieval system or media without the prior written consent of Kontron or one of its authorized agents. The information contained in this document is, to the best of our knowledge, entirely correct.
Preface CP6004X-SA Explanation of Symbols Caution, Electric Shock! DRAFT — FOR INTERNAL USE ONLY This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your material. Please refer also to the section “High Voltage Safety Instructions” on the following page.
CP6004X-SA Preface Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.
Preface CP6004X-SA DRAFT — FOR INTERNAL USE ONLY General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the device, which are not explicitly approved by Kontron and described in this manual or received from Kontron’s Technical Support as a special handling instruction, will void your warranty.
CP6004X-SA Preface Kontron grants the original purchaser of Kontron’s products a TWO YEAR LIMITED HARDWARE WARRANTY as described in the following. However, no other warranties that may be granted or implied by anyone on behalf of Kontron are valid unless the consumer has the express written consent of Kontron. Kontron warrants their own products, excluding software, to be free from manufacturing and material defects for a period of 24 consecutive months from the date of purchase.
DRAFT — FOR INTERNAL USE ONLY Preface CP6004X-SA This page has been intentionally left blank. Page xviii ID 1054-1227, Rev. 1.
Introduction Chapter 1 Introduction ID 1054-1227, Rev. 1.
DRAFT — FOR INTERNAL USE ONLY Introduction CP6004X-SA This page has been intentionally left blank. Page 1 - 2 ID 1054-1227, Rev. 1.
1. Introduction 1.1 Board Overview Introduction The CP6004X-SA (Standard Air-Cooled) is a highly integrated 6U CompactPCI system controller board based on the 3rd generation Intel® Core™ i7 processor combined with the mobile Intel® QM77 Express Chipset. The board supports the Intel® Core™ i7-3615QE quad-core processor with 2.3 GHz built on 22nm technology and provided in a BGA package.
Introduction 1.2 CP6004X-SA Board-Specific Information DRAFT — FOR INTERNAL USE ONLY The CP6004X-SA is a CompactPCI single-board computer based on the 3rd generation Intel® Core™ i7 processor and specifically designed for use in highly integrated platforms with solid mechanical interfacing for a wide range of industrial environment applications. Some of the CP6004X-SA's outstanding features are: • Support for the Intel® Core™ i7-3615QE (SV) quad-core processor, 2.
1.3 System Expansion Capabilities 1.3.1 XMC Module Introduction The CP6004X-SA has one XMC mezzanine interface for support of x1, x4 and x8 PCI Express 2.0 XMC modules providing an easy and flexible way to configure the CP6004X-SA for various application requirements. For information on the XMC interface, refer to chapter 2.10.9, "XMC Interface". 1.3.2 CP6004X-SA-MK2.5SATA Assembly Kit The CP6004X-SA comes with an optional CP6004X-SA-MK2.
Page 1 - 6 Temp. Sense Flash IPMB COMA to Front I/O I2C RST COMB RS-422 or RS-232 Bat. EEP (standard/ recovery) SPI Boot Flashes SIO TPM SATA Cable Conn. VGA CRT to VGA Switch 4x SATA RTC SATA SMB SPI LPC (on request) USB 2x USB HDA DP to HDMI / DVI 2xDP 4x 2x USB HDMI/DVI HDA USB Intel® QM77 VGA VGA Switch RS232 to Rear I/O VGA CRT COMA RJ-45 2.5" SATA SSD/HDD site LPC Default: RS-232 FPGA Board Control GP Intel® I350 GbE Mag. PICMG 2.16, J3 GbE Mag.
CP6004X-SA 1.4.2 Introduction Front Panel Figure 1-2: CP6004X-SA Front Panel IPMI LEDs I0/I1 (red/green): Indicate the software status of the IPMI controller Status LEDs WD (green): Watchdog Status TH (red/green): Temperature Status HS (blue): Hot Swap Control Integral Ethernet LEDs ACT (green): Ethernet Link/Activity SPEED (green/orange/off): Ethernet Speed General Purpose LEDs LED 0..3 (red/green/amber): General Purpose/POST code Note ...
Introduction 1.4.
CP6004X-SA CP6004X-SA Board Layout – Bottom View DRAFT — FOR INTERNAL USE ONLY Figure 1-4: Introduction Temperature Sensor JP1 JP2 JP3 J25 ID 1054-1227, Rev. 1.
Introduction 1.5 Technical Specification Table 1-1: CP6004X-SA Main Specifications FEATURES CPU Processor and Memory DRAFT — FOR INTERNAL USE ONLY CP6004X-SA SPECIFICATIONS The CP6004X-SA supports the Intel® Core™ i7-3615QE (SV) quad-core processor with 2.
CP6004X-SA CP6004X-SA Main Specifications (Continued) SPECIFICATIONS Intel® QM77 Mobile Intel® QM77 Express Chipset: • Two x4 or eight x1 PCI Express 2.0 ports operating at 5 GT/s (only one x2 and one x4 PCI Express ports are used on the CP6004X-SA) • SATA host controller with six ports and RAID 0/1/5/10 support • Two SATA 6 Gb/s ports accessible via onboard connectors • Four SATA 3 Gb/s ports accessible via rear I/O • USB 2.
Introduction Table 1-1: CP6004X-SA Main Specifications (Continued) FEATURES SPECIFICATIONS Standard Rear I/O The following interfaces are routed to the rear I/O connectors J3 and J5. • COMA (RS-232 signaling) and COMB (RS-232 signaling); no buffer on the rear I/O module is necessary • 4 x USB 2.0 • 1 x CRT VGA, 2 x HDMI/DVI • 1 x HDA • 2 x Gigabit Ethernet (compliant with PICMG 2.16, R 1.
CP6004X-SA CP6004X-SA Main Specifications (Continued) FEATURES Front Panel Connectors • • • • • Onboard Connectors • XMC connector, J20 (P15) • Two SATA connectors • One 7-pin, standard SATA connector, J14 • One 34-pin, SATA extension connector, J17 • JTAG connector, J16 • Debug connector, J15 • XDP-SFF (debug) connector, J25 • CompactPCI connectors J1, J2, J3 and J5 • ZDplus high-speed serial rear I/O connectors, J4 and J41 (PICMG 2.
Introduction Table 1-1: CP6004X-SA CP6004X-SA Main Specifications (Continued) FEATURES IPMI Controller SPECIFICATIONS • NXP® ARM7 microcontroller with redundant 512 kB firmware flash and IPMI • Security Thermal Thermal Management Software DRAFT — FOR INTERNAL USE ONLY automatic roll-back strategy • The IPMI controller carries out IPMI commands such as monitoring several onboard temperature conditions, board voltages and the power supply status, and managing hot swap operations.
CP6004X-SA CP6004X-SA Main Specifications (Continued) FEATURES SPECIFICATIONS Mechanical 6U, 4HP, CompactPCI-compliant form factor Power Consumption See Chapter 5 for details. Temperature Ranges Operational: Storage: 0°C to +60°C -40°C to +85°C Standard Without hard disk and without battery Note ... When a battery is installed, refer to the operational specifications of the battery as this determines the storage temperature of the CP6004X-SA (See "Battery" below). Note ...
Introduction 1.6 CP6004X-SA Standards The board complies with the requirements of the following standards: DRAFT — FOR INTERNAL USE ONLY Table 1-2: TYPE CE Standards ASPECT STANDARD REMARKS Emission EN55022 EN61000-6-3 -- Immission EN55024 EN61000-6-2 -- Electrical Safety EN60950-1 -- Mechanical Mechanical Dimensions IEEE1101.
CP6004X-SA Introduction Note ... Customers desiring to perform further environmental testing of Kontron products must contact Kontron for assistance prior to performing any such testing. This is necessary, as it is possible that environmental testing can be destructive when not performed in accordance with the applicable specifications.
DRAFT — FOR INTERNAL USE ONLY Introduction CP6004X-SA This page has been intentionally left blank. Page 1 - 18 ID 1054-1227, Rev. 1.
