Instruction Manual

CP6003-SA Introduction
ID 1044-9757, Rev. 2.0 Page 1 - 13
P R E L I M I N A R Y
Sockets
Front Panel Connectors • VGA: 15-pin, D-Sub connector, J9
• USB: two 4-pin, type A connectors, J6 and J7
• Ethernet: three 8-pin, RJ-45 connectors, J10, J11 and J12
• Serial port: one 8-pin, RJ-45 connector, J8 (COMA)
• PMC/XMC front panel bezel cutout
Onboard Connectors
• PMC connectors J21 - J24 (Jn1 - Jn4)
• XMC connector, J20
• Two SATA connectors
• One 7-pin, standard SATA connector, J14
• One 34-pin, SATA extension connector, J17
• JTAG connector, J16
• Debug connector, J15
• XDP-SFF (debug) connector, J25
• CompactPCI Connectors J1 - J5, J4 optional
• Two 204-pin DDR3 SODIMM sockets, J18 and J19
Switches
DIP Switches Three onboard DIP switches, SW1, SW2, and SW3, for board configuration
Reset Switch One front panel hardware reset switch
Hot Swap Switch One switch for hot swap purposes integrated in the front panel handle in
accordance with PICMG 2.1 Rev. 2.0.
LEDs
System LEDs System Status LEDs:
• I0/I1 (red/green): Indicate the software status of the IPMI
controller
• WD (green): Watchdog Status
• TH (red/green): Temperature Status
• HS (blue): Hot Swap Control
General Purpose LEDs:
• LED 0..3 (red/green/amber): General Purpose/POST code
Ethernet LEDs Gigabit Ethernet Status on CP6003-SA:
• ACT (green): Ethernet Link/Activity
• SPEED (green/orange/off): Ethernet Speed
Timer
Watchdog Timer • Software-configurable, two-stage Watchdog with programmable timeout
ranging from 125 ms to 4096 s in 16 steps
• Serves for generating IRQ or hardware reset
System Timer
• The Intel® QM67 chipset contains three 8254-style counters which have
fixed uses
• In addition to the three 8254-style counters, the Intel® QM67 chipset in-
cludes eight individual high-precision event timers that may be used by
the operating system. They are implemented as a single counter each
with its own comparator and value register.
Table 1-1: CP6003-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS