Instruction Manual

Introduction CP6003-SA
Page 1 - 10 ID 1044-9757, Rev. 2.0
P R E L I M I N A R Y
1.5 Technical Specification
Table 1-1: CP6003-SA Main Specifications
FEATURES SPECIFICATIONS
Processor and Memory
CPU
The CP6003-SA supports the following 2
nd
generation microprocessors:
• Quad-core Intel® Core™ i7-2715QE (SV), 2.1 GHz, 6 MB L3 cache
• Dual-core Intel® Core™ i7-2655LE (LV), 2.2 GHz, 4 MB L3 cache
• Dual-core Intel® Core™ i5-2515E (SV), 2.5 GHz, 3 MB L3 cache
Further processor features:
• Up to four execution cores
• Intel® Hyper-Threading Technology (Intel® HT Technology)
• Intel® 64 Architecture
• Intel® Advanced Vector Extensions (AVX) floating point
• Intel® Turbo Boost Technology 2.0
• Intel® Intelligent Power Sharing (IPS)
• System memory interface with optimized support for dual-channel
DDR3 SDRAM memory at 1333 MHz with ECC
• Integrated 2D and 3D Graphics Engines
• DMI 2.0 with 5 GT/s and FDI interfaces to the Intel® QM67 chipset
• One x8 and two x4 PCI Express 2.0 ports operating at 5 GT/s
Please contact Kontron for further information concerning the suitability of
other Intel processors for use with the CP6003-SA.
Memory Main Memory:
• Up to 16 GB, dual-channel DDR3 SDRAM memory with ECC running at
1333 MHz on two SODIMM sockets
Cache Structure:
• 64 kB L1 cache for each core
• 32 kB instruction cache
• 32 kB data cache
• 256 kB L2 shared instruction/data cache for each core
• Up to 6 MB L3 shared instruction/data cache
Flash Memory:
• Two redundant SPI flashes (2 x 8 MB) for uEFI BIOS and controlled by
the IPMI controller
• Up to 32 GB NAND flash via an onboard Serial ATA Flash module (SSD)
Serial EEPROM with 64 kbit