Owner manual

CP6003-RA/RC Introduction
ID 1046-3890, Rev. 1.0 Page 1 - 17
P R E L I M I N A R Y
Timer
Watchdog Timer • Software-configurable, two-stage Watchdog with programmable timeout
ranging from 125 ms to 4096 s in 16 steps
• Serves for generating IRQ or hardware reset
System Timer
• The Intel® QM67 chipset contains three 8254-style counters which have
fixed uses
• In addition to the three 8254-style counters, the Intel® QM67 chipset in-
cludes eight individual high-precision event timers that may be used by
the operating system. They are implemented as a single counter each
with its own comparator and value register.
IPMI
IPMI Controller • NXP® ARM7 microcontroller with redundant 512 kB firmware flash and
automatic roll-back strategy
• The IPMI controller carries out IPMI commands such as monitoring sev-
eral onboard temperature conditions, board voltages and the power
supply status, and managing hot swap operations.
• The IPMI controller is accessible via two IPMBs (through the J1 and J2
connectors) and one host Keyboard Controller Style (KCS) interface.
Thermal
Thermal Management CPU and board overtemperature protection is provided by:
• Temperature sensors integrated in the 2
nd
gen. Intel® Core™ i7 proces-
sor:
• One temperature sensor for monitoring each processor core
• One temperature sensor for monitoring the graphics core
• One temperature sensor for monitoring the package die temperature
• One temperature sensor integrated in the Intel® QM67 chipset for mon-
itoring the chipset
• One onboard temperature sensor for monitoring the board temperature
• Specially designed heat sink
Security
TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security (on request)
Table 1-2: CP6003-RA/RC Main Specifications (Continued)
FEATURES SPECIFICATIONS