CP6003-RA/RC Rugged 6U CompactPCI Processor Board based on the 2nd Generation Intel® Core™ i7 Processor with the Intel® QM67 Express Chipset Doc. ID: 1046-3890, Rev. 1.0 December 16, 2011 If it’s embedded, it’s Kontron.
Preface CP6003-RA/RC Revision History Publication Title: CP6003-RA/RC: Rugged 6U CompactPCI Processor Board based on the 2nd Generation Intel® Core™ i7 Processor with the Intel® QM67 Express Chipset Doc. ID: 1046-3890 Rev. PRELIMINARY 1.
CP6003-RA/RC Preface Revision History .........................................................................................................ii Imprint ........................................................................................................................ii Disclaimer ..................................................................................................................ii Table of Contents .......................................................................................
Preface 2. CP6003-RA/RC Functional Description ............................................................ 2 - 3 2.1 Processor .................................................................................................2 - 3 2.2 Memory ....................................................................................................2 - 4 2.3 Intel® QM67 Express Chipset .................................................................2 - 4 2.4 Timer ................................................
CP6003-RA/RC Preface 2.10.13.2 Board Functionality when Installed in Peripheral Slot .......... 2 - 23 2.10.13.3 Packet Switching Backplane (PICMG 2.16) ......................... 2 - 23 2.10.13.4 Hot Swap Support ................................................................ 2 - 23 2.10.13.5 Power Ramping .................................................................... 2 - 23 2.10.13.6 Precharge ............................................................................. 2 - 23 2.10.13.
Preface 3.3.4 CP6003-RA/RC Installation of CP6003-RC Peripheral Devices ..............................3 - 15 3.3.4.1 USB Device Installation ........................................................3 - 15 3.3.4.2 Rear I/O Device Installation ..................................................3 - 15 3.3.5 CCPMC/Conduction-Cooled XMC Module Installation .................3 - 16 3.4 Software Installation ..............................................................................3 - 16 4.
CP6003-RA/RC 5. Preface Power Considerations ............................................................ 5 - 3 5.1 System Power ......................................................................................... 5 - 3 5.1.1 CP6003-RA/RC Baseboard ............................................................ 5 - 3 5.1.2 Backplane ....................................................................................... 5 - 3 5.1.3 Power Supply Units ................................................
PRELIMINARY Preface CP6003-RA/RC This page has been intentionally left blank. Page viii ID 1046-3890, Rev. 1.
CP6003-RA/RC Preface 1-1 Version Comparison .................................................................................. 1 - 6 1-2 CP6003-RA/RC Main Specifications ....................................................... 1 - 13 1-3 Standards for the CP6003-RA ................................................................. 1 - 20 1-4 Standards for the CP6003-RC ................................................................. 1 - 21 1-5 Related Publications .................................
Preface CP6003-RA/RC 2-28 CompactPCI Rear I/O Connector J5 Pinout ............................................. 2 - 32 PRELIMINARY 2-29 CompactPCI Rear I/O Connector J5 Signals ........................................... 2 - 33 4-1 DIP Switch SW1 for CompactPCI Interface Configuration ......................... 4 - 3 4-2 DIP Switch SW2 for PMC Interface Configuration ..................................... 4 - 3 4-3 DIP Switch SW3 for Boot Configuration ................................................
CP6003-RA/RC 5-9 Preface Power Consumption of CP6003-RA/RC Accessories ............................... 5 - 8 5-10 Power Consumption per Gigabit Ethernet Port ........................................ 5 - 8 5-11 PMC/CCPMC Module Current ................................................................... 5 - 8 5-12 XMC/Conduction-Cooled XMC Module Current ........................................ 5 - 9 Maximum Reference Point Temperature with Core™ i7-2715QE .............
PRELIMINARY Preface CP6003-RA/RC This page has been intentionally left blank. Page xii ID 1046-3890, Rev. 1.
CP6003-RA/RC Preface 1-1 CP6003-RA/RC Functional Block Diagram .............................................. 1 - 7 1-2 CP6003-RA Front Panel .......................................................................... 1 - 8 1-3 CP6003-RA Board Layout – Top View .................................................... 1 - 9 1-4 CP6003-RC Board Layout – Top View .................................................. 1 - 10 1-5 CP6003-RA Board Layout – Bottom View ............................................
PRELIMINARY Preface CP6003-RA/RC This page has been intentionally left blank. Page xiv ID 1046-3890, Rev. 1.
CP6003-RA/RC Preface Proprietary Note This document contains information proprietary to Kontron. It may not be copied or transmitted by any means, disclosed to others, or stored in any retrieval system or media without the prior written consent of Kontron or one of its authorized agents. The information contained in this document is, to the best of our knowledge, entirely correct.
Preface CP6003-RA/RC Explanation of Symbols Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your material. Please refer also to the section “High Voltage Safety Instructions” on the following page.
CP6003-RA/RC Preface For Your Safety Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.
Preface CP6003-RA/RC General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the device, which are not explicitly approved by Kontron and described in this manual or received from Kontron’s Technical Support as a special handling instruction, will void your warranty.
CP6003-RA/RC Preface Two Year Warranty Kontron warrants their own products, excluding software, to be free from manufacturing and material defects for a period of 24 consecutive months from the date of purchase. This warranty is not transferable nor extendible to cover any other users or long-term storage of the product. It does not cover products which have been modified, altered or repaired by any other party than Kontron or their authorized agents.
PRELIMINARY Preface CP6003-RA/RC This page has been intentionally left blank. Page xx ID 1046-3890, Rev. 1.
Introduction Chapter 1 Introduction ID 1046-3890, Rev. 1.
PRELIMINARY Introduction CP6003-RA/RC This page has been intentionally left blank. Page 1 - 2 ID 1046-3890, Rev. 1.
CP6003-RA/RC 1. Introduction 1.1 Board Overview Introduction The CP6003-RA (Rugged Air-Cooled) / CP6003-RC (Rugged Conductive-Cooled) is a highly integrated 6U CompactPCI system controller board based on the 2nd generation Intel® Core™ i7 processors combined with the mobile Intel® QM67 Express chipset. The CP6003-RA has a front panel and comes with various interfaces such as up to five Gigabit Ethernet ports (three on front I/O and up to four on rear I/O in compliance with PICMG 2.
Introduction 1.2 CP6003-RA/RC CP6003-RA Board-Specific Information PRELIMINARY The CP6003-RA is a rugged air-cooled CompactPCI single-board computer with front I/O. It is based on the 2nd generation Intel® Core™ i7 processor and specifically designed for use in highly integrated platforms with solid mechanical interfacing for a wide range of industrial environment applications.
CP6003-RA/RC 1.3 Introduction CP6003-RC Board-Specific Information Some of the CP6003-RC's outstanding features are: • Support for the following 2nd generation processors: • Quad-core Intel® Core™ i7-2715QE (SV), 2.1 GHz, 6 MB L3 cache • Dual-core Intel® Core™ i7-2655LE (LV), 2.
Introduction CP6003-RA/RC 1.4 System Expansion Capabilities 1.4.1 PMC/XMC Module (CP6003-RA) The CP6003-RA has a 3.3V, rear I/O capable PMC mezzanine interface configurable for either 64-bit/66 MHz PCI or 64-bit/133 MHz PCI-X operation with support for PMC modules. For information on the PMC interface, refer to chapter 2.10.10, "PMC Interface". The CP6003-RA has one XMC mezzanine interface for support of x1, x4 and x8 PCI Express 2.0 XMC modules.
ID 1046-3890, Rev. 1.0 Temp. Sense Flash IPMB I2C GPIO 3.3V COMB RS-422/ RS-232 COMA to Front I/O Page 1 - 7 4x HDA VGA/ 4x 2x SATA CRT USB HDMI/DVI DP to HDMI / DVI 2xDP DMI FDI Mag. 1000BT RJ-45 Rear I/O J4 PMC/XMC PCI / PCIX or XMC PCIe x8 PCIe PICMG 2.16 J3 J3 GbE Mag. GbE Mag. Quad GbE Controller PCIe x4 PCIe PCIe J3 GbE Mag. GbE Switch to Front I/O DDR3 DDR3 w/ ECC soldered memory Channel B 2nd gen. Intel® Core™ i7 GbE Mag.
Introduction 1.6.2 CP6003-RA/RC Front Panel Figure 1-2: CP6003-RA Front Panel Legend: IPMI LEDs I0/I1 (red/green): Indicate the software status of the IPMI controller Status LEDs PRELIMINARY WD (green): Watchdog Status TH (red/green): Temperature Status HS (blue): Hot Swap Control Integral Ethernet LEDs ACT (green): Ethernet Link/Activity SPEED (green/orange/off): Ethernet Speed Page 1 - 8 ID 1046-3890, Rev. 1.
CP6003-RA/RC 1.6.3 Introduction Board Layout Figure 1-3: CP6003-RA Board Layout – Top View Battery SW3 1 A1 ON 2 1 2 F1 1234 J5 ON J18 J14 12 J16 Intel® QM67 63 1 64 2 ON J15 64 2 J17 12 PRELIMINARY A19 63 F19 1 J4 J20 PMC/XMC 63 11 12 1 2 63 64 64 Magnetics J12 GbE C 33 34 DDR3 Memory J19 J11 GbE B SATA Flash Module J10 GbE A J3 12 Magnetics J2 J9 2nd gen. Intel® Core™ i7 DP IPMI/WD/ TH LEDs J8 COM J7 J1 USB J6 USB HS LED J13 ID 1046-3890, Rev. 1.
Introduction Figure 1-4: CP6003-RA/RC CP6003-RC Board Layout – Top View 1 A1 1 2 2 F1 J5 J16 J14 PRELIMINARY A19 63 F19 1 Intel® QM67 64 2 J18 63 1 64 2 J17 J15 J4 J20 PMC/XMC 63 11 12 1 2 63 64 64 Magnetics 33 34 DDR3 Memory J19 SATA Flash Module J3 12 Magnetics J2 2nd gen. Intel® Core™ i7 J1 J13 Page 1 - 10 ID 1046-3890, Rev. 1.
CP6003-RA/RC Figure 1-5: Introduction CP6003-RA Board Layout – Bottom View Temperature Sensor DLED 1 DLED 2 JP1 DLED 3 JP2 JP3 J24 ID 1046-3890, Rev. 1.
Introduction Figure 1-6: CP6003-RA/RC CP6003-RC Board Layout – Bottom View R771 R759 R778 R756 IPMI LED I0 Temperature Sensor IPMI LED I1 DLED 0 PRELIMINARY DLED 1 DLED 2 JP1 DLED 3 JP2 JP3 J24 Page 1 - 12 ID 1046-3890, Rev. 1.
CP6003-RA/RC Technical Specification Table 1-2: CP6003-RA/RC Main Specifications FEATURES Processor and Memory CPU SPECIFICATIONS The CP6003-RA/RC supports the following 2 nd generation microprocessors: • Quad-core Intel® Core™ i7-2715QE (SV), 2.1 GHz, 6 MB L3 cache • Dual-core Intel® Core™ i7-2655LE (LV), 2.
Introduction Table 1-2: CP6003-RA/RC Main Specifications (Continued) SPECIFICATIONS Intel® QM67 Mobile Intel® QM67 Express Chipset: • Two x4 or eight x1 PCI Express 2.0 ports operating at 5 GT/s (only one x4 PCI Express port is used on the CP6003-RA/RC) • SATA host controller with five ports and RAID 0/1/5/10 support • One SATA 6 Gb/s ports accessible via an onboard connector • Four SATA 3 Gb/s ports accessible via rear I/O • USB 2.
CP6003-RA/RC Table 1-2: Introduction CP6003-RA/RC Main Specifications (Continued) FEATURES Rear I/O SPECIFICATIONS The following interfaces are routed to the rear I/O connectors J3 and J5. • COMA (RS-232 signaling) and COMB (RS-422/RS-232 signaling); no buffer on the rear I/O module is necessary • 4 x USB 2.0 • 1 x CRT VGA, 2 x HDMI/DVI • 1 x HDA • 2 x Gigabit Ethernet (compliant with PICMG 2.16, R 1.
Introduction Table 1-2: CP6003-RA/RC CP6003-RA/RC Main Specifications (Continued) Interfaces FEATURES Serial ATA Sockets (CP6003-RA) Switches One Serial ATA 6 Gb/s interfaces for: • One onboard SATA 6 Gb/s interface for the Serial ATA Flash module (up to 32 GB flash memory) Four SATA 3 Gb/s ports accessible via rear I/O Front Panel Connectors Onboard Connectors • • • • • DP: one 20-pin DisplayPort connector, J9 USB: two 4-pin, type A connectors, J6 and J7 Ethernet: three 8-pin, RJ-45 connectors
CP6003-RA/RC Table 1-2: Introduction CP6003-RA/RC Main Specifications (Continued) FEATURES Watchdog Timer SPECIFICATIONS • Software-configurable, two-stage Watchdog with programmable timeout ranging from 125 ms to 4096 s in 16 steps Timer • Serves for generating IRQ or hardware reset System Timer • The Intel® QM67 chipset contains three 8254-style counters which have fixed uses • In addition to the three 8254-style counters, the Intel® QM67 chipset includes eight individual high-precision event tim
Introduction Table 1-2: CP6003-RA/RC Main Specifications (Continued) FEATURES Software PRELIMINARY uEFI BIOS Software IPMI Operating Systems Page 1 - 18 CP6003-RA/RC SPECIFICATIONS AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specification and the Intel Platform Innovation Framework for EFI.
CP6003-RA/RC Table 1-2: Introduction CP6003-RA/RC Main Specifications (Continued) FEATURES SPECIFICATIONS Mechanical 6U, 4HP, CompactPCI-compliant form factor Power Consumption See Chapter 5 for details.
Introduction 1.8 CP6003-RA/RC Standards The CP6003-RA/RC complies with the requirements of the following standards: Table 1-3: Standards for the CP6003-RA TYPE PRELIMINARY CE ASPECT STANDARD REMARKS Emission EN55022 EN61000-6-3 -- Immission EN55024 EN61000-6-2 -- Electrical Safety EN60950-1 -- Mechanical Mechanical Dimensions IEEE1101.10 -- Environmental Climatic Humidity IEC60068-2-78 93% RH at 40°C, non-condensing See note below.
CP6003-RA/RC Standards for the CP6003-RC TYPE CE ASPECT STANDARD REMARKS Emission EN55022 EN61000-6-3 -- Immission EN55024 EN61000-6-2 -- Electrical Safety EN60950-1 -- Mechanical Mechanical Dimensions ANSI / VITA 30.
Introduction 1.9 CP6003-RA/RC Related Publications The following publications contain information relating to this product. Table 1-5: Related Publications PRODUCT CompactPCI Systems and Boards PUBLICATION CompactPCI Specification PICMG 2.0, Rev. 3.0 CompactPCI Packet Switching Backplane Specification PICMG 2.16 Rev. 1.0 CompactPCI System Management Specification PICMG 2.9 Rev. 1.0 CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0 IPMI - Intelligent Platform Management Interface Specification v2.
