Manual

CP6003-SA/RA/RC uEFI BIOS The uEFI Shell
ID 1045-9149, Rev. 2.0 Page 59
P R E L I M I N A R Y
USAGE: Set Watchdog to 16 seconds and activate it
COMMAND / RESPONSE (none):
Shell> kwdt -t 7
Note: Because there is no application which triggers the Watchdog, the
system will be reset after 16 seconds in this case. This command
should be invoked from a script, followed by an operating system
boot, and the OS then has to start triggering the Watchdog.
Display Watchdog configuration:
COMMAND / RESPONSE:
Shell> kwdt
Kontron Board Watchdog Configuration:
Watchdog Configuration Register (0x28C): 0x00
kwdt (continued)