Manual

The uEFI Shell CP6003-SA/RA/RC uEFI BIOS
Page 54 ID 1045-9149, Rev. 2.0
P R E L I M I N A R Y
SETTINGS: mode <mode>: Display/Set the IPMI controller operating mode
Options:
bmc: IPMI controller operates in BMC mode (master)
smc: IPMI controller operates in SMC mode (slave)
net: Set IPMI-over-LAN (IOL) / Serial-over-LAN (SOL) parameters
sel: Display system event log
sensor list|read: Show board sensor data
Options:
list: Display an overview of all available board sensors
read: Display specific sensor data
raw [<bytes> <...>]: Execute raw IPMI command
Syntax:
raw [NetFn] [LUN] [COMMAND] ...
rawsendmessage [<bytes> <...>]: Execute raw SendMessage
command
Syntax:
rawsendmessage [rsSa] [CHANNEL] [NetFn] [LUN]
[COMMAND] ...
info: Display IPMI firmware information
kipmi (continued)