Manual

Main Setup CP6003-SA/RA/RC uEFI BIOS
Page 22 ID 1045-9149, Rev. 2.0
P R E L I M I N A R Y
2.3.4.3 Data Bits
Default setting: 8
2.3.4.4 Parity
Default setting: None
2.3.4.5 Stop Bits
Default setting: 1
2.3.4.6 Flow Control
Default setting: None
2.3.4.7 Recorder Mode
Use this setting to specify whether display formatting characters are to be transmitted along
with data or if only data is to be transmitted.
Default setting: Disabled
SETTING DESCRIPTION
7 Use one of these settings to specify the number of data bits per frame.
8
SETTING DESCRIPTION
None Use one of these settings to select the parity for the serial port.
Even
Odd
Mark
Space
SETTING DESCRIPTION
1 Use one of these settings to specify the number of stop bits for the serial port.
2
SETTING DESCRIPTION
None Use one of these settings to specify the type of flow control to be used for this serial port.
Hardware RTS/CTS
Software Xon/Xoff
SETTING DESCRIPTION
Disabled Use this setting to specify normal terminal operation.
Enabled Use this setting to specify that only text will be sent. Use this to capture terminal data