User guide

CP6003-SA/RA/RC IPMI Firmware
ID 1045-5656, Rev. 2.0 Page 21
P R E L I M I N A R Y
6. OEM Commands and Command Extensions
6.1 Get Device ID Command with OEM Extensions
The IPMI specification defines four optional bytes in the response to Get Device ID. The
response bytes [13:16] hold the “Auxiliary Firmware Revision Information”.
Table 5: Get Device ID Command with OEM Extensions
COMMAND LUN NetFn CMD
Get Device ID command with OEM extensions 00h App = 06h 01h
REQUEST DATA
Byte Data Field
--
RESPONSE DATA
Byte Data Field
1 Completion Code
2:12 Regular Get Device ID Command response fields
13 Release number of the IPMI firmware:
10h for R10,
11h for R11,
…
Release number 1… of the IPMI firmware. The open tool “ipmitool” displays this as “SDR” in
the response to the command “ipmitool fwum status”.
14 Board Geographical Address (slot number):
1 … = Board in chassis slot 1…
15 Reserved
16 Reserved