User guide

IPMI Firmware CP6003-SA/RA/RC
Page 16 ID 1045-5656, Rev. 2.0
P R E L I M I N A R Y
Get System GUID 22.14 App 37h O / No
Get Channel Authentication Capabilities 22.13 App 38h
O / Yes
Get Session Challenge 22.15 App 39h
O / Yes
Activate Session 22.17 App 3Ah
O / Yes
Set Session Privilege Level 22.18 App 3Bh
O / Yes
Close Session 22.19 App 3Ch
O / Yes
Get Session Info 22.20 App 3Dh
O / Yes
Get AuthCode 22.21 App 3Fh O / No
Set Channel Access 22.22 App 40h
O / Yes
Get Channel Access 22.23 App 41h
O / Yes
Get Channel Info 22.24 App 42h
O / Yes
Set User Access 22.26 App 43h
O / Yes
Get User Access 22.27 App 44h
O / Yes
Set User Name 22.28 App 45h
O / Yes
Get User Name 22.29 App 46h
O / Yes
Set User Password 22.30 App 47h
O / Yes
Activate Payload 24.1 App 48h
O / Yes
Deactivate Payload 24.2 App 49h
O / Yes
Get Payload Activation Status 24.4 App 4Ah
O / Yes
Get Payload Instance Info 24.5 App 4Bh
O / Yes
Set User Payload Access 24.6 App 4Ch
O / Yes
Get User Payload Access 24.7 App 4Dh
O / Yes
Get Channel Payload Support 24.8 App 4Eh
O / Yes
Get Channel Payload Version 24.9 App 4Fh
O / Yes
Get Channel OEM Payload Info 24.10 App 50h O / No
Master Write-Read 22.11 App 52h
O / Yes
Get Channel Cipher Suits 22.15 App 54h O / No
Suspend/Resume Payload Encryption 24.3 App 55h
O / Yes
Set Channel Security Keys 22.25 App 56h O / No
Get System Interface Capabilities 22.9 App 57h O / No
CHASSIS DEVICE COMMANDS O
Get Chassis Capabilities 28.1 Chassis 00h
O / Yes
Table 3: Standard IPMI Commands (Continued)
COMMAND
IPMI 2.0
SPEC.
SECTION
NETFN CMD
KONTRON
SUPPORT
ON IPMI
CONTROLLER