Owner's manual

CP6002 Introduction
ID 1036-6431, Rev. 3.0 Page 1 - 19
P R E L I M I N A R Y
1.7 Standards
The board complies with the requirements of the following standards:
Table 1-3: Standards for the CP6002
TYPE ASPECT STANDARD REMARKS
CE Emission EN55022
EN61000-6-3
--
Immission EN55024
EN61000-6-2
--
Electrical Safety EN60950-1 --
Mechanical Mechanical Dimen-
sions
IEEE 1101.10 --
Environmental Climatic Humidity IEC60068-2-78 --
WEEE Directive 2002/96/EC Waste electrical and electronic equipment
RoHS Directive 2002/95/EC Restriction of the use of certain hazardous
substances in electrical and electronic
equipment
Vibration
(Sinusoidal)
IEC60068-2-6 Ruggedized version test parameters:
• 10-300 (Hz) frequency range
• 2 (g) acceleration
• 1 (oct/min) sweep rate
• 10 cycles/axis
• 3 axes
Single Shock IEC60068-2-27 Ruggedized version test parameters:
• 30 (g) acceleration
• 9 (ms) shock duration half sine
• 3 number of shocks per direction (total:
18)
• 6 directions
• 5 (s) recovery time
Permanent Shock IEC60068-2-29 Ruggedized version test parameters:
• 15 (g) acceleration
• 11 (ms) shock duration half sine
• 500 number of shocks per direction
• 6 directions
• 5 (s) recovery time