CP6002 6U CompactPCI Processor Board based on the Intel® Core™ i7 Processor with the Intel® QM57 Chipset Doc. ID: 1036-6431, Rev. 3.0 July 27, 2012 If it’s embedded, it’s Kontron.
Preface CP6002 Revision History Publication Title: CP6002: 6U CompactPCI Processor Board based on the Intel® Core™ i7 Processor with the Intel® QM57 Chipset Doc. ID: 1036-6431 PRELIMINARY Rev. Brief Description of Changes Date of Issue 1.0 Initial issue 17-Aug-2010 2.0 General update 3.0 General update, added description for the Intel® Core™ i7-660UE and the Intel® Celeron® P4505 processors.
CP6002 Preface Revision History .........................................................................................................ii Imprint ........................................................................................................................ii Disclaimer ..................................................................................................................ii Table of Contents .............................................................................................
Preface 2. CP6002 Functional Description ............................................................ 2 - 3 2.1 Processor .................................................................................................2 - 3 2.2 Memory ....................................................................................................2 - 4 2.3 Intel® QM57 Express Chipset .................................................................2 - 5 2.4 Timer ......................................................
CP6002 Preface 2.10.11.3 Packet Switching Backplane (PICMG 2.16) ......................... 2 - 23 2.10.11.4 Hot Swap Support ................................................................ 2 - 23 2.10.11.5 Power Ramping .................................................................... 2 - 23 2.10.11.6 Precharge ............................................................................. 2 - 23 2.10.11.7 Handle Switch ...................................................................... 2 - 23 2.10.
Preface CP6002 4.3 I/O Address Map ......................................................................................4 - 6 PRELIMINARY 4.4 CP6002-Specific Registers ......................................................................4 - 7 4.4.1 Status Register 0 (STAT0) ...............................................................4 - 7 4.4.2 Status Register 1 (STAT1) ...............................................................4 - 8 4.4.3 Control Register 0 (CTRL0) .......................
CP6002 Preface 5.2.1 Power Consumption of the CP6002 Accessories ........................... 5 - 8 5.2.2 Power Consumption of the Gigabit Ethernet Controller .................. 5 - 8 5.3 Start-Up Currents of the CP6002 ............................................................ 5 - 8 5.4 Maximum Power Consumption of PMC/XMC Modules .......................... 5 - 9 6. Thermal Considerations ......................................................... 6 - 3 6.1 Board Internal Thermal Monitoring ........
PRELIMINARY Preface CP6002 This page has been intentionally left blank. Page viii ID 1036-6431, Rev. 3.
CP6002 Preface 1-1 Version Comparison .................................................................................. 1 - 5 1-2 CP6002 Main Specifications .................................................................... 1 - 12 1-3 Standards for the CP6002 ....................................................................... 1 - 19 1-4 Additional Standards for the CP6002-R2-MC .......................................... 1 - 20 1-5 Related Publications ......................................
Preface CP6002 4-2 DIP Switch SW2 for CompactPCI Interface Configuration ......................... 4 - 4 4-3 DIP Switch SW3 for PMC Interface Configuration ..................................... 4 - 4 4-4 JP2 Jumper Setting for RS-422 TXD Termination (COM2) ........................ 4 - 5 4-5 JP3 Jumper Setting for RS-422 RXD Termination (COM2) ....................... 4 - 5 4-6 I/O Address Map ........................................................................................
CP6002 Preface CP6001-EXT-SATA Main Specifications .................................................... A - 3 A-2 Board-to-Board Connector J1 Pinout ........................................................ A - 6 A-3 SATA Connector J2 Pinout ........................................................................ A - 7 B-1 SATA Flash Module Main Specifications ................................................... B - 3 PRELIMINARY A-1 ID 1036-6431, Rev. 3.
PRELIMINARY Preface CP6002 This page has been intentionally left blank. Page xii ID 1036-6431, Rev. 3.
CP6002 Preface 1-1 CP6002 Functional Block Diagram .......................................................... 1 - 6 1-2 CP6002 Front Panels ............................................................................... 1 - 7 1-3 CP6002-R1 Board Layout – Top View .................................................... 1 - 8 1-4 CP6002-R1-MC Board Layout – Top View ............................................. 1 - 9 1-5 CP6002-R2-MC Board Layout – Top View ...........................................
PRELIMINARY Preface CP6002 This page has been intentionally left blank. Page xiv ID 1036-6431, Rev. 3.
CP6002 Preface Proprietary Note This document contains information proprietary to Kontron. It may not be copied or transmitted by any means, disclosed to others, or stored in any retrieval system or media without the prior written consent of Kontron or one of its authorized agents. The information contained in this document is, to the best of our knowledge, entirely correct.
Preface CP6002 Explanation of Symbols Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your material. Please refer also to the section “High Voltage Safety Instructions” on the following page.
CP6002 Preface For Your Safety Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.
Preface CP6002 General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the device, which are not explicitly approved by Kontron and described in this manual or received from Kontron’s Technical Support as a special handling instruction, will void your warranty.
CP6002 Preface Two Year Warranty Kontron warrants their own products, excluding software, to be free from manufacturing and material defects for a period of 24 consecutive months from the date of purchase. This warranty is not transferable nor extendible to cover any other users or long-term storage of the product. It does not cover products which have been modified, altered or repaired by any other party than Kontron or their authorized agents.
PRELIMINARY Preface CP6002 This page has been intentionally left blank. Page xx ID 1036-6431, Rev. 3.
Introduction Chapter 1 Introduction ID 1036-6431, Rev. 3.
PRELIMINARY Introduction CP6002 This page has been intentionally left blank. Page 1 - 2 ID 1036-6431, Rev. 3.
CP6002 1. Introduction 1.1 Board Overview Introduction The CP6002 is a highly integrated 6U CompactPCI system controller board based on the multichip Intel® Core™ i7 processor combined with the mobile Intel® QM57 Express chipset. The CP6002 includes up to 8 GB, dual-channel Double Data Rate (DDR3) memory with Error Checking and Correcting (ECC) running at 1066 MHz. The graphics controller and the memory controller are integrated in the processor.
Introduction CP6002 The board is offered with various Board Support Packages including Windows and Linux operating systems. For further information concerning the operating systems available for the CP6002, please contact Kontron. 1.
CP6002 Introduction • Rear I/O on J3 and J5; optionally on J4 for PMC only • Two GPIOs on J5 (on request) • AMI Aptio®, a uEFI-compliant platform firmware 1.3 System Expansion Capabilities 1.3.1 PMC/XMC Module 1.3.2 CP6002-MK2.5SATA Assembly Kit The CP6002 comes with an optional CP6002-MK2.5SATA assembly kit comprised of one CP6001-EXT-SATA module and the necessary components needed for mounting the module on the CP6002. The CP6001-EXT-SATA module is required for connecting an onboard 2.
Page 1 - 6 Temp. Sense FPGA Board Control COM1 RS-232 COM2 RS-422 COM1/2 PS/2 SATA to PATA CF Socket DP Intel® QM57 PCIe GbE 82574L Mag. 1000BT RJ-45 GbE Mag. GbE 82574L HDA USB PCIe USB 2x USB HDA 4xUSB SMB SATA SPI LPC 4xSATA SATA Switch LPC TPM SATA SSD/HDD SATA Flash Module EEP CMOS 2nd 1st µEFI µEFI BIOS BIOS FLASH FLASH Super I/O COM1/2 KCS IPMB PS/2 2xCOM IC 2 BMC Reset I 2C VGA DP GbE Mag. GbE 82574L PCIe PCIe GbE 82574L Mag.
CP6002 1.5.
Introduction 1.5.3 CP6002 Board Layout Figure 1-3: CP6002-R1 Board Layout – Top View 10 2 12 2 9 1 J14 PMC A/ XMC A 1 11 SW1 1 2 3 4 ON J24 1 Battery J15 A1 2 (P15) F1 1 2 J26 (Jn1) J5 Logic BMC J16 J28 (Jn2) PRELIMINARY CompactFlash Socket A19 63 F19 1 64 63 64 2 1 2 J25 (Jn3) GbE Chipset Mag. J4 J27 GbE (Jn4) Mag.
CP6002 Introduction Figure 1-4: CP6002-R1-MC Board Layout – Top View 10 2 12 2 9 1 J14 PMC A/ XMC A 1 11 SW1 1 2 3 4 ON J24 Battery J15 2 (P15) 1 A1 F1 1 2 J26 (Jn1) J5 Logic BMC J16 J28 (Jn2) CompactFlash Socket A19 63 F19 1 64 63 64 2 1 2 J25 Mag. J4 J27 GbE PRELIMINARY (Jn3) GbE Chipset (Jn4) Mag.
Introduction Figure 1-5: CP6002 CP6002-R2-MC Board Layout – Top View J14 10 2 12 2 9 1 PMC A/ XMC A 1 11 SW1 1 2 3 4 ON Battery J15 A1 1 F1 2 1 2 J26 (Jn1) J5 J24 (P15) Logic J28 BMC (Jn2) A19 63 F19 1 64 63 64 2 1 2 J25 (Jn3) GbE PRELIMINARY Chipset Mag. J4 J27 GbE (Jn4) Mag.
CP6002 Figure 1-6: Introduction CP6002 Board Layout – Bottom View Temp1 Super I/O DLED 0 GbE PRELIMINARY DLED 1 DLED 2 DLED 3 GbE DDR3 Memory JP1 JP2 JP3 PCIe-toPCI-X Bridge PCIe-toPCI-X Bridge J30 ID 1036-6431, Rev. 3.
Introduction 1.6 Technical Specification Table 1-2: CP6002 Main Specifications FEATURES Processor and Memory CPU PRELIMINARY CP6002 SPECIFICATIONS The CP6002 supports the following microprocessors: • Intel® Core™ i7-610E (SV), 2.53 GHz, 4 MB L3 cache • Intel® Core™ i7-620LE (LV), 2.0 GHz, 4 MB L3 cache • Intel® Core™ i7-660UE (ULV), 1.33 GHz, 4 MB L3 cache • Intel® Celeron® P4505 (SV), 1.
CP6002 CP6002 Main Specifications (Continued) SPECIFICATIONS Intel® QM57 Mobile Intel® QM57 Express Chipset: • One x4 and four x1 PCI Express 2.0 ports operating at 2.5 GT/s • SATA host controller with six ports, 3 Gbit/s data transfer rate and RAID 0/1/5/10 support • USB 2.
Introduction Table 1-2: CP6002 CP6002 Main Specifications (Continued) FEATURES Hot Swap Compatible SPECIFICATIONS The CP6002 supports System Master hot swap functionality and applicationdependent hot swap functionality when used in a peripheral slot. Interfaces PRELIMINARY When used as a System Master, the CP6002 supports individual clocks for each slot and the ENUM signal handling is in compliance with the PICMG 2.1 Hot Swap Specification.
CP6002 Table 1-2: Introduction CP6002 Main Specifications (Continued) FEATURES Mass Storage SPECIFICATIONS CompactFlash (CP6002-R1 and CP6002-R1-MC): • CompactFlash socket for type I and II CompactFlash cards (DMA capable true IDE mode) • The CompactFlash is always configured as IDE master • The CompactFlash interface is realized via a SATA-to-PATA bridge Integrated Serial ATA Host Controllers: • Provide support for independent DMA operation on six ports • Data transfer rates up to 300 MB/s • High-per
Introduction Table 1-2: CP6002 CP6002 Main Specifications (Continued) SPECIFICATIONS DIP Switches Three onboard DIP switches, SW1, SW2, and SW3, for board configuration Reset Switch One front panel hardware reset switch Hot Swap Switch One switch for hot swap purposes integrated in the front panel handle in accordance with PICMG 2.1 Rev. 2.0.
CP6002 CP6002 Main Specifications (Continued) Software Security FEATURES SPECIFICATIONS TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and softwarebased data and system security (on request) uEFI BIOS AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specification and the Intel Platform Innovation Framework for EFI.
Introduction Table 1-2: CP6002 CP6002 Main Specifications (Continued) FEATURES SPECIFICATIONS Mechanical 6U, 4HP, CompactPCI-compliant form factor Power Consumption See Chapter 5 for details. Temperature Ranges Operational: 0°C to +60°C -40°C to +70°C Storage: -55°C to +85°C Standard (depending on processor version and airflow in the system) Extended (CP6002-R2-MC) without TPM Without hard disk and without battery Note ... Note ...
CP6002 1.7 Introduction Standards The board complies with the requirements of the following standards: Standards for the CP6002 TYPE CE ASPECT STANDARD REMARKS Emission EN55022 EN61000-6-3 -- Immission EN55024 EN61000-6-2 -- Electrical Safety EN60950-1 -- Mechanical Mechanical Dimensions IEEE 1101.
Introduction CP6002 Note ... Kontron performs comprehensive environmental testing of its products in accordance with applicable standards. Customers desiring to perform further environmental testing of Kontron products must contact Kontron for assistance prior to performing any such testing. This is necessary, as it is possible that environmental testing can be destructive when not performed in accordance with the applicable specifications.
CP6002 1.8 Introduction Related Publications The following publications contain information relating to this product. Table 1-5: Related Publications PRODUCT CompactPCI Systems and Boards PUBLICATION CompactPCI Specification PICMG 2.0, Rev. 3.0 CompactPCI Packet Switching Backplane Specification PICMG 2.16 Rev. 1.0 CompactPCI System Management Specification PICMG 2.9 Rev. 1.0 CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0 IPMI - Intelligent Platform Management Interface Specification v2.
PRELIMINARY Introduction CP6002 This page has been intentionally left blank. Page 1 - 22 ID 1036-6431, Rev. 3.
