Manual

CP6002 uEFI BIOS Boot Setup
ID 1039-1612, Rev. 2.0 Page 35
4. Boot Setup
Select the Boot tab to enter the Boot Setup screen. This screen lists the sub-screens for boot
configuration and boot device priority.
4.1 Boot Configuration
4.1.1 Quiet Boot
This function is used to display either POST output messages or a splash screen during boot-up.
Default setting: Disabled
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Chipset Boot Security Save & Exit
Boot Configuration
Quiet Boot [Disabled]
UEFI Boot [Enabled]
Bootup NumLock State [Off]
CSM16 Module Version 07.63
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Disabled]
Boot Option Priorities
Boot Option #1 [Built-in EFI Shell]
Boot Option #2 [SanDisk uSSD 5000 ...]
Hard Drive BBS Priorities
Network Device BBS Priorities
CD/DVD ROM Drive BBS Priorities
Floppy Drive BBS Priorities
BEV Device BBS Priorities
Add New Boot Option
Delete Boot Option
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save
ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
SETTING DESCRIPTION
Disabled Use this setting to display POST output messages during boot-up.
Enabled Use this setting to display a splash screen during boot-up.