Manual

Chipset Setup CP6002 uEFI BIOS
Page 26 ID 1039-1612, Rev. 2.0
3.1.1.2.2 SATA Mode Selection
This function is used to select the operational mode of the SATA controller when it is enabled.
Default setting: IDE
3.1.1.2.3 Serial ATA Ports 0 - 5
Displays an identifier string if a device is connected to the port indicated (0-5).
3.1.1.2.4 Software Preserve Ports 0 - 5
Indicates whether or not a connected device supports Software Setting Preservation (SSP).
3.1.1.2.5 Hot Plug Ports 2 - 5
This function is used to enable or disable hot plug. This function is available only when SATA
mode is set to AHCI or RAID and only for SATA ports 2-5.
Default setting: Disabled
SETTING DESCRIPTION
IDE Use this setting to select IDE mode operation.
AHCI Use this setting to select AHCI mode operation.
RAID Use this setting to select RAID mode operation.
SETTING DESCRIPTION
Disabled Use this setting to disable the hot plug feature.
Enabled Use this setting to enable the hot plug feature.