Manual

Main Setup CP6002 uEFI BIOS
Page 14 ID 1039-1612, Rev. 2.0
2.4.3.2.3 Bits per second
Default setting: 115200
2.4.3.2.4 Flow Control
Default setting: None
2.4.3.2.5 Data Bits
This is a display-only function providing information about the frame width for the Out-of-Band
Management.
2.4.3.2.6 Parity
This is a display-only function providing information about the parity for Out-of-Band Manage-
ment.
2.4.3.2.7 Stop Bits
This is a display-only function providing information about the number of stop bits for Out-of-
Band Management.
SETTING DESCRIPTION
9600 Use one of these settings to select the baud rate of the serial port.
19200
57600
115200
SETTING DESCRIPTION
None Use one of these settings to specify the type of flow control to be used for this serial port.
Hardware RTS/CTS
Software Xon/Xoff