User Manual

CP6002 IPMI Firmware User Guide
ID: 1039-1613, Rev. 2.0 Page 27
10. OEM Commands and Command Extensions
10.1 Get Device ID Command with OEM Extensions
The IPMI specification defines four optional bytes in the response to 'Get Device ID'. The re-
sponse bytes [13:16] hold the 'Auxiliary Firmware Revision Information'.
Table 5: Get Device ID Command with OEM Extensions
COMMAND LUN NetFn CMD
Get Device ID command with OEM extensions 00h App = 06h 01h
REQUEST DATA
Byte Data Field
--
RESPONSE DATA
Byte Data Field
1 Completion Code
2:12 Regular Get Device ID Command response fields
13 Release number of the management controller firmware:
10h for R10,
11h for R11,
…
Release number 1… of the IPMI controller firmware. The open ipmi tool ‘ipmitool’ displays this
as ‘SDR’ in the response to the command ‘ipmitool fwum status’.
14 Module Geographical Address (slot number):
1 … = Module in chassis slot 1…
15 Reserved
16 Reserved