User Manual

CP6002 IPMI Firmware User Guide
ID: 1039-1613, Rev. 2.0 Page 19
9. Supported IPMI and ATCA Commands
9.1 Standard IPMI Commands
Part of the command list in IPMI specification 2.0
M = mandatory, O = optional
Table 3: Standard IPMI Commands
COMMAND
IPMI 2.0
SPEC.
SECTION
NETFN CMD
KONTRON
SUPPORT
ON BMC
IPM DEVICE “GLOBAL” COMMANDS M
Get Device ID 20.1 App 01h
M / Yes [1]
Cold Reset 20.2 App 02h
O / Yes
Warm Reset 20.3 App 03h O / No
Get Self Test Results 20.4 App 04h
O / Yes
Manufacturing Test On 20.5 App 05h O / No
Set ACPI Power State 20.6 App 06h
O / Yes
Get ACPI Power State 20.7 App 07h
O / Yes
Get Device GUID 20.8 App 08h O / No
Broadcast “Get Device ID” 20.9 App 01h
M / Yes
BMC WATCHDOG TIMER COMMANDS
O
Reset Watchdog Timer 27.5 App 22h
O / Yes
Set Watchdog Timer 27.6 App 24h
O / Yes
Get Watchdog Timer 27.7 App 25h
O / Yes
BMC DEVICE AND MESSAGING COMMANDS O
Set BMC Global Enables 22.1 App 2Eh
O / Yes
Get BMC Global Enables 22.2 App 2Fh
O / Yes
Clear Message Flags 22.3 App 30h
O / Yes
Get Message Flags 22.4 App 31h
O / Yes
Enable Message Channel Receive 22.5 App 32h
O / Yes