Owner manual

Kontron Modular Computers GmbH ID 31440, Rev. 01
P R E L I M I N A R Y
RevNr. = CP384 - 31440_01 - 060503/144230
Page 4 - 4
Configuration CP384
4.2.3 Channel Configuration
The following figure illustrates the typical schematic of an input channel.
Figure 4-2: Input Channel Schematic
Signal inputs are required to be connected: plus to plus, minus to ground as shown in figure
4-3 below.
Figure 4-3: Input Configuration (Example for Channel 0)
G
S
JFET
D
to system
System Input Cluster
Signal
Input
Voltage
Source
V
+
CON2
DIGIN0+
Pin21
DIGIN0-
Pin42
CP384