Manual

CP383 Configuration

27784.01.VC.040308/162544

P R E L I M I N A R Y

31-16 r/w 0 Not used

15 - 0 r/w 1 Input event mask bits

Note ...

A set bit means that event detection is disabled for the corresponding input port.

Table 4-7: Input Event Polarity Register

BITS TYPE DEFAULT FUNCTION

31-16 r/w 0 Not used

15 - 0 r/w 0 Input event polarity bits

Note ...

A bit setting of 0 bit means that an event is detected when the input port

changes from 0 to 1 whereas a setting of 1 means that an event is detected

when the input changes from 1 to 0.

Table 4-8: Input Status Register

BITS TYPE DEFAULT FUNCTION

31 r/w 0 Input latch-on-event status flag

30 r/w 0 Input compare status flag

15 - 0 r/w 0 Input event status flags

Note ...

A set bit means that an event was detected on the corresponding input port.

Events must be cleared by writing a "1" to the corresponding input event flag.

Otherwise, consecutive events on the same input would no longer be detected.

Table 4-6: Input Event Mask Register