Owner's manual

Page 1 - 12 Doc.ID: 34938, Rev 1.0

Introduction CP342

CUSTOMER SPECIFIC

P R E L I M A R Y

CP342-SFP

Controller Intel® 82546GB, dual channel Gigabit Ethernet, lead free version

Ethernet Two channels of Gigabit Ethernet: 1000 Mbit/s

Ethernet Interfaces Two SFP cage interfaces on the front panel

LEDs Three status LEDs per channel, integrated in the front panel, green

Boot Flash Flash memory socket (PLCC32) available for up to 1 MB of removable Flash

memory for user-installed and programmed boot chip (Flash memory is optionally

available with the product)

Speed Configuration Gigabit Ethernet only

Signalling Voltage 3.3 volt (5 volt tolerant)

Plug & Play Design No jumpers to be configured

Power Consumption Source: 3.3 V: consumption: ca. 5.6 watts

Temperature Range Operational: 0ºC to +55ºC Standard

Storage: -55ºC to +125ºC

Climatic Humidity 93% relative humidity at 40°C, non-condensing

Dimensions 160 mm L x 100 mm W (single height Eurocard)

Board Weight ca. 145 g (with heatsink)

CP342-RIO

Controller Intel® 82546GB, dual channel Gigabit Ethernet, lead free version

Ethernet Two channels of three speed Ethernet: 10/100/1000 Mbit/s

Ethernet Interfaces Backplane rear IO only on the J2 connector (requires rear IO capable backplane)