Owner's manual

Page 1 - 6 Doc.ID: 34938, Rev 1.0
Introduction CP342
CUSTOMER SPECIFIC
P R E L I M A R Y
1.4 System Relevant Information
The following system relevant information is general in nature but should still be considered
when developing applications using the CP342.
1.5 Board Diagrams
The following diagrams provide additional information concerning board functionality and com-
ponent layout.
Table 1-1: System Relevant Information
SUBJECT INFORMATION
System Configuration The CP342 may be used in any CompactPCI system.
Master/Slave Functionality The CP342 can operate as a peripheral board (bus master capable).
Board Location in the System The CP342 board may be installed anywhere in a system except in the system slot
of a CompactPCI backplane. The CP342-RIO requires a rear IO capable slot for
use.
Hot Swap Compatibility The CP342 is not Hot Swap capable.
Operating Systems The CP342 can operate under the following operating systems:
Microsoft
® Windows® XP
Microsoft
® Windows® XP Embedded
Linux
VxWorks®
Please contact Kontron for further information concerning other operating sys-
tems.
LEGEND FOR FIGURE 1-2
CPCI CompactPCI
GbE Gigabit Ethernet
SFP Small Form-factor Pluggable
TSE Three Speed Ethernet (10/100/1000 Mbits/s)
TXRX Transceiver