CP342 Dual Port Three Speed Ethernet Board for Copper and Fiber Optic Applications User Guide PRELIMARY Doc.ID: 34938, Rev. 1.
CUSTOMER SPECIFIC Preface CP342 Revision History Publication Title: CP342: Dual Port Three Speed Ethernet Board for Copper and Fiber Optic Applications Doc.ID: 34938 Rev. PRELIMARY 1.0 Brief Description of Changes Date of Issue Initial issue 08-NOV-2006 Imprint Kontron Modular Computers GmbH may be contacted via the following: MAILING ADDRESS TELEPHONE AND E-MAIL Kontron Modular Computers GmbH +49 (0) 800-SALESKONTRON Sudetenstraße 7 sales@kontron.
CUSTOMER SPECIFIC CP342 Preface Revision History .........................................................................................................ii Imprint ........................................................................................................................ii Disclaimer ..................................................................................................................ii Table of Contents ...........................................................................
CUSTOMER SPECIFIC Preface 2. CP342 Functional Description ............................................................ 2 - 3 2.1 General Information .................................................................................2 - 3 2.2 Board-Level Interfacing Diagram .............................................................2 - 3 2.3 Interfaces .................................................................................................2 - 5 2.3.1 CompactPCI Bus Interface ...................
CUSTOMER SPECIFIC CP342 Preface 1-1 System Relevant Information ................................................................... 1 - 6 1-2 Main Specifications ................................................................................ 1 - 11 1-3 Applied Standards .................................................................................. 1 - 13 1-4 Related Publications ..............................................................................
CUSTOMER SPECIFIC Preface CP342 PRELIMARY This page has been intentionally left blank. Page vi Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 Preface 1-1 CP342 Application System Interfacing Diagram ...................................... 1 - 7 1-2 CP342 System Level Interfacing Diagram ............................................... 1 - 8 1-3 CP342, CP342-SFP, and CP342-RIO Front Panels ................................ 1 - 9 1-4 CP342 Board (Top View) ....................................................................... 1 - 10 1-5 CP342_SFP Board (Top View) ....................................................
CUSTOMER SPECIFIC Preface CP342 PRELIMARY This page has been intentionally left blank. Page viii Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 Preface Proprietary Note This document contains information proprietary to Kontron. It may not be copied or transmitted by any means, disclosed to others, or stored in any retrieval system or media without the prior written consent of Kontron or one of its authorized agents. The information contained in this document is, to the best of our knowledge, entirely correct.
CUSTOMER SPECIFIC Preface CP342 Explanation of Symbols Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your material. Please refer also to the section “High Voltage Safety Instructions” on the following page.
CUSTOMER SPECIFIC CP342 Preface For Your Safety Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.
CUSTOMER SPECIFIC Preface CP342 General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the device, which are not explicitly approved by Kontron and described in this manual or received from Kontron’s Technical Support as a special handling instruction, will void your warranty.
CUSTOMER SPECIFIC CP342 Preface Two Year Warranty Kontron grants the original purchaser of Kontron’s products a TWO YEAR LIMITED HARDWARE as described in the following. However, no other warranties that may be granted or implied by anyone on behalf of Kontron are valid unless the consumer has the express written consent of Kontron.
CUSTOMER SPECIFIC Preface CP342 PRELIMARY This page has been intentionally left blank. Page xiv Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC Introduction Chapter 1 Introduction Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC Introduction CP342 PRELIMARY This page has been intentionally left blank. Page 1 - 2 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 Introduction 1. Introduction 1.1 System Overview The CompactPCI board described in this manual operates with the PCI bus architecture to support additional I/O and memory-mapped devices as required by various industrial applications. For detailed information concerning the CompactPCI standard, please consult the complete Peripheral Component Interconnect (PCI) and CompactPCI Specifications.
CUSTOMER SPECIFIC Introduction 1.2 Board Overview 1.2.1 Board Introduction CP342 The CP342 board is a CompactPCI three speed Ethernet LAN controller for multiple server-toclient networking functions. It provides dual independent Gigabit / Fast Ethernet interfaces. Both interfaces are based on the Intell® Gigabit Ethernet PCI Bus LAN Controller 82546GB with integrated physical layer interface (PHY).
CUSTOMER SPECIFIC CP342 Introduction 1.3 Board Versions 1.3.1 CP342 This is the standard version of the CP342. It has a dual RJ45 connector on the front panel with two LEDs integrated in each connector. 1.3.2 CP342-RIO This version of the CP342 provides the basis for rear IO output. Both Ethernet channel signals are routed to the J2 connector for rear IO capablility on backplanes which support rear IO.
CUSTOMER SPECIFIC Introduction 1.4 CP342 System Relevant Information The following system relevant information is general in nature but should still be considered when developing applications using the CP342. Table 1-1: System Relevant Information PRELIMARY SUBJECT INFORMATION System Configuration The CP342 may be used in any CompactPCI system. Master/Slave Functionality The CP342 can operate as a peripheral board (bus master capable).
CUSTOMER SPECIFIC CP342 1.5.1 Introduction Application System Interfacing Figure 1-1: CP342 Application System Interfacing Diagram Application System (AS) CompactPCI System AS Processes Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC Introduction 1.5.2 CP342 System Level Interfacing Figure 1-2: CP342 System Level Interfacing Diagram Application System CompactPCI System CPCI Backplane PRELIMARY CP342 / CP342-SFP / CSP342-RIO 1 2 RJ45 3 SFP CPCI Backplane SFP TXRX 4 TSE Page 1 - 8 CP-RIO3-42 GbE TSE 1 CP342, RJ45 front panel IO 2 CP342-SFP, front panel IO (SFP cage only) 3 CP342-RIO, Rear IO (to backplane only) 4 CP-RIO3-42, optional RIO module Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 1.5.3 Introduction Front Panels Figure 1-3: CP342, CP342-SFP, and CP342-RIO Front Panels CP342-SFP CP342-RIO PRELIMARY CP 342 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC Introduction 1.5.4 CP342 Board Layout PRELIMARY Figure 1-4: CP342 Board (Top View) J3A J3B Dual Eth. Ctrl J1 Dual Eth. Ctrl J1 FLASH Figure 1-5: CP342_SFP Board (Top View) J6 D11 J7 D10 FLASH Page 1 - 10 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 Introduction Figure 1-6: CP342_RIO Board (Top View) J2 D11 Dual Eth. Ctrl J1 FLASH 1.
CUSTOMER SPECIFIC Introduction CP342 Table 1-2: Main Specifications (Continued) CP342-RIO PRELIMARY CP342-SFP TYPE SPECIFICATIONS Controller Intel® 82546GB, dual channel Gigabit Ethernet, lead free version Ethernet Two channels of Gigabit Ethernet: 1000 Mbit/s Ethernet Interfaces Two SFP cage interfaces on the front panel LEDs Three status LEDs per channel, integrated in the front panel, green Boot Flash Flash memory socket (PLCC32) available for up to 1 MB of removable Flash memory for us
CUSTOMER SPECIFIC CP342 1.7 Introduction Applied Standards The Kontron Modular Computers’ CompactPCI module CP342 complies with the requirements of the following standards: Table 1-3: Applied Standards TYPE CE STANDARD Emission EN55022, EN61000-6-3 Immunity, Industrial Environment EN61000-6-2 Immunity, IT Equipment EN55024 Electrical Safety EN60950-1 Note: The CP342 is specified I/O only for: SELV and EVL. MECHANICAL ENVIRONMENTAL 1.8 Mechanical Dimensions IEEE1101.
CUSTOMER SPECIFIC Introduction CP342 PRELIMARY This page has been intentionally left blank. Page 1 - 14 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC Functional Description Chapter 21 Functional Description Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC Functional Description CP342 PRELIMARY This page has been intentionally left blank. Page 2 - 2 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 2. Functional Description Functional Description The following chapters present more detailed, board level information about the CP342, the CP342-SFP, and the CP342-RIO versions of the product whereby the board components and their basic functionality are discussed in general. 2.1 General Information The CP342 is designed as a dual channel Gigabit Ethernet CompactPCI IO board with interfacing for front panel connectors as well as supporting rear IO on the J2 connector.
CUSTOMER SPECIFIC Functional Description CP342 Figure 2-1: CP342 Board Level Interfacing CompactPCI System CP342 / CP342-SFP /CP342-RIO J1 Connector PRELIMARY 82546GB Dual Gigabit Ethernet Controller CP342SFP CP342 MAG MAG RJ45 RJ45 J3A J3B CP342SFP & RIO MAG MAG CP342RIO SFP1 J7 SFP2 J6 D10 D11 J2 BACKPLANE CPRIO3 - 42 RJ45 Page 2 - 4 RJ45 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 Functional Description 2.3 Interfaces 2.3.1 CompactPCI Bus Interface The complete CompactPCI connector configuration comprises two connectors designated as J1 and J2. Their function is as follows: Figure 2-2: CPCI Connectors J1/J2 • J1: 32-bit CompactPCI interface with PCI bus signals and power • J2: has Rear I/O interface functionality CompactPCI Connector Keying CompactPCI connectors support guide lugs to ensure a correct polarized mating.
CUSTOMER SPECIFIC Functional Description 2.3.1.2 CP342 CompactPCI Connectors J1 and J2 Pinouts The CP342 is provided with two 2 mm x 2 mm pitch female CompactPCI bus connectors, J1 and J2. PRELIMARY Table 2-1: CompactPCI Bus Connector J1 Pinout PIN ROW Z ROW A ROW B 25 NC 5V NC NC 3.3V 5V GND 24 NC AD[1] 5V V(I/O) AD[0] NC GND 23 NC 3.3V AD[4] AD[3] 5V AD[2] GND 22 NC AD[7] GND 3.3V AD[6] AD[5] GND 21 NC 3.
CUSTOMER SPECIFIC CP342 Rear IO CompactPCI Bus Connector J2 Pinout (CP342-RIO only) PIN ROW Z ROW A ROW B ROW C ROW D ROW E ROW F 22 NC NC NC NC NC NC GND 21 NC NC GND NC NC NC GND 20 NC NC GND NC NC NC GND 19 NC GND GND NC NC +3.
CUSTOMER SPECIFIC Functional Description 2.3.2 CP342 Gigabit Ethernet Figure 2-3: Dual Gigabit Ethernet Connector J3A/B The CP342 board includes two 10Base-T/100BaseTX/1000Base-T Ethernet ports. LAN1 The Boot from LAN feature is supported. J3A The Ethernet connectors are realized as RJ45 connectors. The interfaces provide automatic detection and switching between 10Base-T, 100Base-TX and 1000Base-T data transmission (Auto-Negotiation).
CUSTOMER SPECIFIC CP342 2.3.3 Functional Description SFP Cages The CP342-SFP board includes two SFP cages for SFP transceivers, fiber optic or RJ45, along with three operational status LEDs for each Ethernet channel. Only Gigabit Ethernet is available with this configuration.
CUSTOMER SPECIFIC Functional Description CP342 Ethernet LED Status ACT (green): This LED monitors network activity. The LED goes temporarily on if network packets are being sent or received through the RJ45 port. LINK (green): This LED monitors network connection. The LED lights up when a valid link (cable connection) has been established. When this LED remains off, a valid link has not been established due to a missing or a faulty cable connection.
CUSTOMER SPECIFIC Installation Chapter 31 Installation Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC Installation CP342 PRELIMARY This page has been intentionally left blank. Page 3 - 2 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 3. Installation Installation The CP342 has been designed for easy installation. However, the following standard precautions, installation procedures, and general information must be observed to ensure proper installation and to preclude damage to the board, other system components, or injury to personnel. 3.1 Safety Requirements The following safety precautions must be observed when installing or operating the CP342.
CUSTOMER SPECIFIC Installation 3.2 CP342 CP342 Installation Procedures The following procedures are applicable the installation of the CP342 in a system. Procedures for standard removal are found in its respective chapter. To perform an installation of the CP342 in a system proceed as follows: 1. Ensure that the safety requirements indicated in Chapter 3.1 are observed. Warning! Failure to comply with the instruction below may cause damage to the board or result in improper system operation.
CUSTOMER SPECIFIC CP342 3.3 Installation Standard Removal Procedures To remove the board proceed as follows: 1. Ensure that the safety requirements indicated in Chapter 3.1 are observed. Particular attention must be paid to the warning regarding the heat sink! Warning! Care must be taken when applying the procedures below to ensure that neither the CP342 nor system boards are physically damaged by the application of these procedures. Ensure that no power is applied to the system before proceeding.
CUSTOMER SPECIFIC Installation CP342 PRELIMARY This page has been intentionally left blank. Page 3 - 6 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP-RIO3-42 Appendix A1 CP-RIO3-42 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP-RIO3-42 CP342 PRELIMARY This page has been intentionally left blank. Page A - 2 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 CP-RIO3-42 A. CP-RIO3-42 A.1 Overview The CP-RIO3-42 provides optional rear I/O connectivity for Gigabit Ethernet. Is is designed for use in conjunction with the CP342-RIO board or any other rear IO capable board with appropriate signal conditioning and pinout on the J1 connector. There are two Gigabit Ethernet ports available, but without operational status LEDs.
CUSTOMER SPECIFIC CP-RIO3-42 A.3 CP342 Board Layout Figure A-2: CP-RIO3-42 Board and J1 Connector Pin Layout (CPCI rJ2) 22 PRELIMARY 1 J1 B J10 A 1 Z ABCDE F Note: Pinrow F is GND and Z is not connected Page A - 4 Doc.ID: 34938, Rev 1.
CUSTOMER SPECIFIC CP342 CP-RIO3-42 A.4 Gigabit Ethernet Figure A-3: Dual Gigabit Ethernet Connector J10A/B The CP-RIO3-42 board includes two 10Base-T/ 100Base-TX/1000Base-T Ethernet ports. The Ethernet connectors are realized as RJ45 connectors, but without operational status LEDs. The interfaces provide automatic detection and switching between 10Base-T, 100Base-TX and 1000Base-T data transmission (Auto-Negotiation). Auto-wire switching for crossed cables is also supported (AutoMDI/X).
CUSTOMER SPECIFIC CP-RIO3-42 A.5 CP342 Rear I/O Interface on J1 (CPCI rJ2) PRELIMARY Table A-2: Rear IO J1 Pinout (CPCI rJ2) PIN ROW Z ROW A ROW B ROW C ROW D ROW E ROW F 22 NC NC NC NC NC NC GND 21 NC NC GND NC NC NC GND 20 NC NC GND NC NC NC GND 19 NC GND GND NC NC +3.
CUSTOMER SPECIFIC CP342 A.6 CP-RIO3-42 Technical Specifications Table A-3: Main Specifications SPECIFICATIONS Ethernet Two channels of three speed Ethernet: 10/100/1000 Mbit/s Ethernet Interfaces Two RJ45 front panel connectors LEDs None Temperature Range Operational: Storage: 0ºC to +55ºC Standard -40ºC to +85ºC E2 (on request) -55ºC to +125ºC Climatic Humidity 93% relative humidity at 40°C, non-condensing Dimensions 80 mm L x 100 mm W (single height) Board Weight ca. 100 g A.
CUSTOMER SPECIFIC CP-RIO3-42 CP342 PRELIMARY This page has been intentionally left blank. Page A - 8 Doc.ID: 34938, Rev 1.
