Instruction Manual

The uEFI Shell CP3003-SA/CP3003-V uEFI BIOS
Page 48 ID 1053-4014, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
OPTIONS:
(continued)
GbeA Used to select the routing of the GbeA port
GbeB Used to select the routing of the GbeB port
ComA Used to select the routing of the serial port 0
Note: This option is only valid for CP3003-SA/
CP3003-V rear /O versions.
Pxe Used to select a PXE boot device
gbeA and gbeB: Ethernet ports available on the
front panel of the 4 HP CP3003-SA/CP3003-V
via the J7A/B dual Gigabit Ethernet connector.
These ports are switchable to rear I/O.
gbeC: Ethernet port available on the front panel
of the 8 HP CP3003-SA/CP3003-V with a
CP3003-HDD extension module via the Gigabit
Ethernet connector J5.
Tdp Used to select a lower operating TDP level by
preserving maximum possible performance.
kboardconfig (continued)