Instruction Manual

Main Setup CP3003-SA/CP3003-V uEFI BIOS
Page 18 ID 1053-4014, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
2.7.2.2.1 Terminal Type
Default setting: ANSI
2.7.2.2.2 Bits per second
Default setting: 115200
2.7.2.2.3 Data Bits
Default setting: 8
2.7.2.2.4 Parity
Default setting: None
2.7.2.2.5 Stop Bits
Default setting: 1
SETTING DESCRIPTION
VT100 Use one of these settings to select the terminal type to be emulated.
VT100+
VT-UTF8
ANSI
SETTING DESCRIPTION
9600 Use one of these settings to select the baud rate of the serial port.
19200
38400
57600
115200
SETTING DESCRIPTION
7 Use one of these settings to specify the number of data bits per frame.
8
SETTING DESCRIPTION
None Use one of these settings to select the parity for the serial port.
Even
Odd
Mark
Space
SETTING DESCRIPTION
1 Use one of these settings to specify the number of stop bits for the serial port.
2