Instruction Manual

Main Setup CP3003-SA/CP3003-V uEFI BIOS
Page 16 ID 1053-4014, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
2.7 Serial Port Console Redirection
This screen provides information about functions for specifying the Serial Port Console Redi-
rection configuration settings. Console redirection can be used to remotely operate system set-
tings and the uEFI console.
2.7.1 COM0
The COM0 port (serial port 0) corresponds to the COMA port (RS-232) and is available either
on the front panel of the 8HP CP3003-SA/CP3003-V equipped with a CP3003-HDD extension
module or on the rear I/O.
2.7.1.1 Console Redirection
Default setting: Disabled
2.7.1.2 Console Redirection Settings
For information about this function, refer to Chapter 2.7.2.2 in this manual.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Boot Security Save & Exit
COM0
Console Redirection [Disabled]
 Console Redirection Settings
COM1
Console Redirection [Disabled]
 Console Redirection Settings
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection [Disabled]
Console Redirection Settings
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
SETTING DESCRIPTION
Disabled Use this setting to disable console redirection for COMA (RS-232).
Enabled Use this setting to enable console redirection for COMA (RS-232).