Instruction Manual

Main Setup CP3003-SA/CP3003-V uEFI BIOS
Page 12 ID 1053-4014, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
2.5 Firmware Update Configuration
This screen provides functions for specifying the firmware update configuration settings.
2.5.1 Me FW Image Re-Flash
This function is used to enable or disable Intel® Management Engine (ME) firmware re-flashing.
Default setting: Disable
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Boot Security Save & Exit
Me FW Image Re-Flash [Disabled]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
SETTING DESCRIPTION
Disable Use this setting to disable ME firmware re-flashing.
Enable Use this setting to enable ME firmware re-flashing.