CP3002 3U CompactPCI Processor Board based on the Intel® Core™ i7 Processor with the Intel® QM57 Chipset Doc. ID: 1042-9252, Rev. 2.0 July 27, 2012 If it’s embedded, it’s Kontron.
Preface CP3002 Revision History Publication Title: CP3002: 3U CompactPCI Processor Board based on the Intel® Core™ i7 Processor with the Intel® QM57 Chipset Doc. ID: 1042-9252 PRELIMINARY Rev. Brief Description of Changes Date of Issue 1.0 Initial issue 19-Jan-2011 2.0 General update, added description for the Intel® Core™ i7-660UE and the Intel® Celeron® U3405 processors.
CP3002 Preface Revision History .........................................................................................................ii Imprint ........................................................................................................................ii Disclaimer ..................................................................................................................ii Table of Contents .............................................................................................
Preface CP3002 2.2 Memory ....................................................................................................2 - 4 2.3 Intel® QM57 Express Chipset .................................................................2 - 5 2.4 Timer ........................................................................................................2 - 5 2.5 Watchdog Timer ......................................................................................2 - 6 2.6 Battery ................................
CP3002 Preface 2.11.10.1 CompactPCI Connector Keying ........................................... 2 - 18 2.11.10.2 CompactPCI Connectors J1 and J2 Pinouts ........................ 2 - 19 2.11.10.3 Optional Rear I/O Interface .................................................. 2 - 22 2.11.10.4 Rear I/O Pin Description ...................................................... 2 - 25 3. Installation ............................................................................... 3 - 3 3.1 Safety Requirements ...
Preface CP3002 4.3.8 Status Register 2 (STAT2) ............................................................. 4 - 11 4.3.9 Board ID High Byte Register (BIDH) ............................................. 4 - 11 4.3.10 Board and PLD Revision Register (BREV) ...................................4 - 12 4.3.11 Geographic Addressing Register (GEOAD) ..................................4 - 12 4.3.12 Watchdog Timer Control Register (WTIM) ....................................4 - 13 4.3.
CP3002 Preface 6.4 External Thermal Regulation ................................................................... 6 - 5 A. 6.4.1 Operational Limits for the CP3002 .......................................................6 - 7 6.4.2 Peripherals ...................................................................................... 6 - 9 CP3002-HDD Module ...............................................................A - 3 A.1 Overview ....................................................................
Preface C. CP3002 SATA Flash Module ................................................................ C - 3 C.1 Technical Specifications ......................................................................... C - 3 PRELIMINARY C.2 SATA Flash Module Layout .................................................................... C - 4 Page viii ID 1042-9252, Rev. 2.
CP3002 Preface 1-1 CP3002 Main Specifications ...................................................................... 1 - 9 1-2 Standards ................................................................................................ 1 - 15 1-3 Additional Standards for Boards Ordered with Ruggedized Service ....... 1 - 16 1-4 Add. Standards for CP3002 with Rug. Service and Conformal Coating .. 1 - 17 1-5 Related Publications ........................................................................
Preface CP3002 4-4 Status Register 1 (STAT1) .......................................................................... 4 - 6 4-5 Control Register 0 (CTRL0) ....................................................................... 4 - 6 4-6 Control Register 1 (CTRL1) ....................................................................... 4 - 7 4-7 Device Protection Register (DPROT) ......................................................... 4 - 8 4-8 Reset Status Register (RSTAT) ....................
CP3002 Preface B-4 Dual Gigabit Ethernet Connector J10A/B Pinout ....................................... B - 9 B-5 COM Connectors J2a (COMA) and J3a (COMB) Pinout ......................... B - 10 B-6 Serial Port Con. J2 (COMA) and J3 (COMB) Pinout ............................... B - 10 B-7 Peripheral Connector J13 Pinout ............................................................. B - 11 B-8 SATA Connectors J5 and J6 Pinout .........................................................
PRELIMINARY Preface CP3002 This page has been intentionally left blank. Page xii ID 1042-9252, Rev. 2.
CP3002 Preface 1-1 CP3002 Functional Block Diagram .......................................................... 1 - 6 1-2 4HP CP3002 Front Panel ........................................................................ 1 - 7 1-3 4HP CP3002 Board Layout (Top View) .................................................... 1 - 8 1-4 4HP CP3002 Board Layout (Bottom View) .............................................. 1 - 8 2-1 USB Connectors J9 and J10 ........................................................
Preface CP3002 B-8 Serial Port Connectors J2 (COMA) and J3 (COMB) ............................. B - 10 B-9 Peripheral Connector J13 ....................................................................... B - 11 B-10 SATA Connectors J5 and J6 .................................................................. B - 12 Rear I/O CompactPCI Connector rJ2 .................................................... B - 13 C-1 SATA Flash Module Layout (Top View) ...................................................
CP3002 Preface Proprietary Note This document contains information proprietary to Kontron. It may not be copied or transmitted by any means, disclosed to others, or stored in any retrieval system or media without the prior written consent of Kontron or one of its authorized agents. The information contained in this document is, to the best of our knowledge, entirely correct.
Preface CP3002 Explanation of Symbols Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your material. Please refer also to the section “High Voltage Safety Instructions” on the following page.
CP3002 Preface For Your Safety Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.
Preface CP3002 General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the device, which are not explicitly approved by Kontron and described in this manual or received from Kontron’s Technical Support as a special handling instruction, will void your warranty.
CP3002 Preface Two Year Warranty Kontron warrants their own products, excluding software, to be free from manufacturing and material defects for a period of 24 consecutive months from the date of purchase. This warranty is not transferable nor extendible to cover any other users or long-term storage of the product. It does not cover products which have been modified, altered or repaired by any other party than Kontron or their authorized agents.
PRELIMINARY Preface CP3002 This page has been intentionally left blank. Page xx ID 1042-9252, Rev. 2.
Introduction Chapter 1 Introduction ID 1042-9252, Rev. 2.
PRELIMINARY Introduction CP3002 This page has been intentionally left blank. Page 1 - 2 ID 1042-9252, Rev. 2.
CP3002 1. Introduction 1.1 Board Overview Introduction The board supports the Intel® Core™ i7-610E processor with 2.53 GHz frequency, the Intel® Core™ i7-620LE processor with 2.0 GHz frequency, and the Intel® Core™ i7-660UE processor with 1.33 GHz frequency, all with 64 kB L1 cache, 256 kB L2 cache and 4 MB L3 cache, as well as the Intel® Celeron® U3405 processor with 1.07 GHz frequency and 64 kB L1 cache, 512 kB L2 cache, 2 MB L3 cache.
Introduction 1.2 CP3002 Board-Specific Information The CP3002 is a CompactPCI single-board computer based on the Intel® Core™ i7 and the Intel® Celeron processor and specifically designed for use in highly integrated platforms with solid mechanical interfacing for a wide range of industrial environment applications. PRELIMINARY Some of the CP3002's outstanding features are: • Support for the following multi-chip package (MCP) processors: • Intel® Core™ i7-610E (SV), 2.
CP3002 1.3 System Expansion Capabilities 1.3.1 CP3002-HDD Module Introduction The CP3002-HDD module for the 8HP CP3002 version provides legacy PC I/O ports. It includes one digital DVI port, two USB 2.0 ports, one COM port, and one CFast card socket. A SATA hard disk interface is also available for installing a Serial ATA 2.5” HDD or SSD. The CP3002-HDD module cannot be used in conjunction with the SATA Flash module. For further information concerning the CP3002-HDD module, refer to Appendix A. 1.3.
Page 1 - 6 USB type-A USB type-A DSUB 15-pin USB USB VGA Watchdog / Thermal POST Code / Debug / Gen.
CP3002 1.4.2 Introduction Front Panel Figure 1-2: 4HP CP3002 Front Panel LEGEND: CP3002 Watchdog and Overtemperature Status LEDs: WD (green): TH (red/green): Watchdog Status Overtemperature Status General Purpose LEDs: General Purpose/POST Code Note ... If the General Purpose LEDs 0..3 are lit red during boot-up, a failure is indicated before the uEFI BIOS has started. For further information, please contact Kontron. USB 2.
Introduction 1.4.3 CP3002 Board Layout Figure 1-3: 4HP CP3002 Board Layout (Top View) J4 J3 J5 J6 VGA CPU SATA FLash Module J9 USB PRELIMINARY 1 Memory Modules Ch. A J2 GMCH Ch. B J10 USB J11A GbE A Chipset SW1 ON J1 1234 J11B GbE B J13 DDR3 SODIMM Sockets J12 Figure 1-4: 4HP CP3002 Board Layout (Bottom View) TH LED J14 WD LED JP1 JP2 LED 0 LED 1 LED 2 LED 3 Page 1 - 8 ID 1042-9252, Rev. 2.
CP3002 Technical Specification Table 1-1: CP3002 Main Specifications FEATURES CPU SPECIFICATIONS The CP3002 supports the following microprocessors: Processor and Memory • • • • Intel® Core™ i7-610E (SV), 2.53 GHz, 4 MB L3 cache Intel® Core™ i7-620LE (LV), 2.0 GHz, 4 MB L3 cache Intel® Core™ i7-660UE (ULV), 1.33 GHz, 4 MB L3 cache Intel® Celeron® U3405 (ULV), 1.
Introduction Table 1-1: CP3002 Main Specifications (Continued) FEATURES SPECIFICATIONS Intel® QM57 Mobile Intel® QM57 Express Chipset: • Two x4 or eight x1 PCI Express 2.0 ports operating at 2.5 GT/s (only two x1 PCI Express ports are used) • SATA host controller with six ports, 3 Gbit/s data transfer rate and RAID 0/1/5/10 support • USB 2.
CP3002 Table 1-1: Introduction CP3002 Main Specifications (Continued) FEATURES CompactPCI SPECIFICATIONS Compliant with CompactPCI Specification PICMG® 2.0 R 3.0: • • • • System master operation 32-bit / 33 MHz master interface 3.3 V or 5 V (universal PCI interface) Support for up to seven peripheral slots (7x REQ/GNT signals) When installed in a peripheral slot, the CP3002 is isolated from the CompactPCI bus. It receives power from the backplane and supports rear I/O.
Introduction Table 1-1: CP3002 CP3002 Main Specifications (Continued) FEATURES Serial SPECIFICATIONS Two 16C550-compatible UARTs: Serial ATA Serial ATA Host Controllers integrated in the Intel® QM57 chipset: • Provide support for six SATA ports, two onboard, two on rear I/O, and two on the 8HP extension module • Data transfer rates up to 300 MB/s • High-performance RAID 0/1/5/10 functionality on all SATA ports I/O Expansion Interfaces I/O expansion to 8HP board version: Front Panel Connectors Soc
CP3002 Table 1-1: Introduction CP3002 Main Specifications (Continued) FEATURES Watchdog Timer SPECIFICATIONS • Software-configurable, two-stage Watchdog with programmable timeout ranging from 125 ms to 4096 s in 16 steps Timer • Serves for generating IRQ or hardware reset System Timer • The Intel® QM57 chipset contains three 8254-style counters which have fixed uses • In addition to the three 8254-style counters, the Intel® QM57 chipset in- CPU and board overtemperature protection is provided by:
Introduction Table 1-1: CP3002 CP3002 Main Specifications (Continued) FEATURES SPECIFICATIONS Mechanical 3U, 4HP, CompactPCI-compliant form factor Power Consumption See Chapter 5 for details. Temperature Range Operational: 0°C to +60°C -25°C to +70°C Storage: -55°C to +85°C Standard (depending on processor version and airflow in the system) Extended (depending on processor version and airflow in the system) Without hard disk and without battery Note ... Note ...
CP3002 1.6 Introduction Standards This product complies with the requirements of the following standards. Standards TYPE CE ASPECT STANDARD Emission EN55022 EN61000-6-3 Immission EN55024 EN61000-6-2 Electrical Safety EN60950-1 Mechanical Mechanical Dimensions IEEE 1101.
Introduction CP3002 In addition, boards ordered with the ruggedized service comply with the following standards as well.
CP3002 Introduction Furthermore, boards providing ruggedized service and conformal coating comply with the following standards as well. Add. Standards for CP3002 with Rug. Service and Conformal Coating TYPE ASPECT Environmental Random Vibration (Broadband) VITA 47, Class V1 Test parameters: 5-100 (Hz) frequency range 0.
Introduction 1.7 CP3002 Related Publications The following publications contain information relating to this product. Table 1-5: Related Publications PRELIMINARY PRODUCT PUBLICATION CompactPCI Systems CompactPCI Specification PICMG 2.0, Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0 Serial ATA Serial ATA 1.0a Specification CFast CFast Specification Revision 1.0 Platform Firmware Unified Extensible Firmware Interface (uEFI) specification, version 2.