Owner manual

CP3002/-RC/-RA uEFI BIOS Boot Setup

ID 1042-8946, Rev. 3.0 Page 21

P R E L I M I N A R Y

3. Boot Setup

Select the Boot tab to enter the Boot Setup screen. This screen lists the sub-screens for boot

configuration and boot device priority.

3.1 Boot Configuration

3.1.1 Quiet Boot

This function is used to display either POST output messages or a splash screen during boot-up.

Default setting: Disabled

Main Boot Security Save & Exit

Boot Configuration

Quiet Boot [Disabled]

UEFI Boot [Enabled]

Setup Prompt Timeout 2

Bootup NumLock State [On]

CSM16 Module Version 07.60

GateA20 Active [Upon Request]

Option ROM Messages [Force BIOS]

Interrupt 19 Capture [Disabled]

Boot Option Priorities

Boot Option #1 [Built-in EFI Shell]

Boot Option #2 [SanDisk uSSD 5000 ...]

Hard Drive BBS Priorities

Network Device BBS Priorities

CD/DVD ROM Drive BBS Priorities

Floppy Drive BBS Priorities

BEV Device BBS Priorities

Add New Boot Option

Delete Boot Option

: Select Screen

: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3 Optimized Defaults

F4: Save ESC: Exit

SETTING DESCRIPTION

Disabled Use this setting to display POST output messages during boot-up.

Enabled Use this setting to display a splash screen during boot-up.