Owner manual
Main Setup CP3002/-RC/-RA uEFI BIOS
Page 12 ID 1042-8946, Rev. 3.0
P R E L I M I N A R Y
2.5 Serial Port Console Redirection
This screen provides information about functions for specifying the Serial Port Console Redi-
rection configuration settings. Console redirection can be used to remotely operate system set-
tings and the EFI console.
2.5.1 COM0
On the CP3002 the COM0 port corresponds to the COMA port (RS-232) and is available either
on the 8HP extension module or on the rear I/O.
On the CP3002-RA/-RC the COM0 port corresponds to the COMA port (RS-232) and is avail-
able only on the rear I/O.
2.5.1.1 Console Redirection
Default setting: Disabled
2.5.1.2 Console Redirection Settings
For information about this function, refer to Chapter 2.5.5 in this manual.
Aptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc.
Main Boot Security Save & Exit
COM0
Console Redirection [Disabled]
Console Redirection Settings
COM1
Console Redirection [Disabled]
Console Redirection Settings
COM4
Console Redirection Port Is Disabled
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection [Disabled]
Out-of-Band Mgmt Port [COM0]
Data Bits 8
Parity None
Stop Bits 1
Terminal Type [VT-UTF8]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save ESC: Exit
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
SETTING DESCRIPTION
Disabled Use this setting to disable console redirection for COM A (RS-232).
Enabled Use this setting to enable console redirection for COM A (RS-232).