Owner manual

CP3002/-RC/-RA uEFI BIOS Main Setup

ID 1042-8946, Rev. 3.0 Page 11

P R E L I M I N A R Y

2.4 S5 RTC Wake Settings

This screen provides functions for specifying the S5 RTC Wake Settings.

2.4.1 S5 RTC Wake Settings

This function defines the RTC wake-up settings to allow the system to wake up from the S5

(soft off) state.

2.4.2 Wake System with Fixed Time

This function allows the system to wake up from S5 state at a specified time.

Default setting: Disabled

2.4.2.1 Wake-Up Hour, Wake-Up Minute, Wake-Up Second

This function is used to specify the hour (0-23), the minute (0-59) and the second (0-59) when

the system is to wake up from S5 state.

Note: This function is available only when the function “Wake System with Fixed Time” is

set to Enabled.

2.4.3 Wake System with Dynamic Time

This function is intended for debugging purposes only and is therefore locked.

Main Boot Security Save & Exit

Wake system with Fixed Time [Enabled]

Wake up hour 0

Wake up minute 0

Wake up second 0

Wake system with Dynamic Time [Disabled]

: Select Screen

: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3 Optimized Defaults

F4: Save ESC: Exit

SETTING DESCRIPTION

Disabled Use this setting to disable Wake System with Fixed Time.

Enabled Use this setting to enable Wake System with Fixed Time.