User Manual

Hardware Description
9 CP-RIO6-923-F User Guide
www.kontron.com
3 Hardware Description
This chapter describes the board specific features of the CP-RIO6-923-F. The building blocks are:
• Ethernet ports
• CompactPCI bus connectors
The module does not require a power supply. There are no active components on the board.
3.1 RJ45 1000BASE-T Ports
On the RJ45 variants, three Integrated Connector Modules (network magnetics + RJ45) are the physical
interface for the 10/100/1000Base-T ports, there are three 2x4 modules on the CP-RIO6-923-F and three
1x4 modules on the CP-RIO6-923-F12.
The CP-RIO6-923-F supports PICMG 2.16 backplane ports FL1 to FL23 and FLf (Fabric to Fabric Link Port). The
CP-RIO6-923-F12 supports FL1 to FL12. The switch interfaces which are accessible via the module are listed
in the following table.
Table 3-1: Ethernet Port Mapping
PICMG 2.16 Backplane Port CP-RIO6-923-F Port Label CP-RIO6-923-F12 Port Label
FL_f Fx -
FL_01 1x 1x
FL_02 2x 2x
FL_03 3x 3x
FL_04 4x 4x
FL_05 5x 5x
FL_06 6x 6x
FL_07 7x 7x
FL_08 8x 8x
FL_09 9x 9x
FL_10 10x 10x
FL_11 11x 11x
FL_12 12x 12x
FL_13 13x -
FL_14 14x -
FL_15 15x -
FL_16 16x -
FL_17 17x -
FL_18 18x -
FL_19 19x -
FL_20 20x -
FL_21 21x -
FL_22 22x -
FL_23 23x -