User guide

Hardware Management
39 AT8910/AT8940
www.kontron.com
4.3.2.1 OemApSetControlState
Table 4-18:Command OemApSetControlState
Table 4-19:Control States
OemApFormatStorage OEM 3Eh 3 09h YES
OemApSetSdrLocatorString OEM 3Eh 3 0Ah YES
OemApSetSerialNumber OEM 3Eh 3 0Bh
OemApGetSerialNumber OEM 3Eh 3 0Ch
OemApSetManufacturingDate OEM 3Eh 3 0Dh
OemApGetManufacturingDate OEM 3Eh 3 0Eh
OemApSetNvData OEM 3Eh 3 0Fh YES
OemApGetNvData OEM 3Eh 3 10h YES
OemApSetDeviceGuid OEM 3Eh 3 11h
OemApGetNvData OEM 3Eh 3 12h YES
OemApGetNvSensConfig OEM 3Eh 3 13h YES
OemApLoadNvDefaults OEM 3Eh 3 14h
OemApFpgaWriteRead OEM 3Eh 3 62h YES
OemApGetReleaseInfo OEM 30h 3 01h YES
OemApWriteSMI OEM 30h 3 97h YES
OemApReadSMI OEM 30h 3 98h YES
Byte Data Field
Request Data 1 Control ID
2 Control State
Response Data 1 Completion Code
Control ID Control State
0 - Flash Select
0 - Select Flash Image 0 (valid for next boot)
1 - Select Flash Image 1 (valid for next boot)
1 - Guest OS reset
0 - Request GUEST0 reset
1 - Request GUEST1 reset
2 - ETX module control
0 - Press Reset Button (100ms)
1 - Press Power Button (500ms)
2 - Press Power Button (4500ms)
3 - Ethernet Clock Source Select
0 - Local Oscillator Clock is enabled
1 - Base Interface Sync_E_Clock is enabled
4 - SOL source selection
Select Serial interface for SOL
1 - ETX module (default)
2 - Guest#0
3 - Guest#1
Command Name Standard NetFN LUN Code Supported