User guide

Hardware Management
37 AT8910/AT8940
www.kontron.com
Set FRU Activation 3-19 PICMG 0Ch M Yes
Get Device Locator
Record ID
3-39 PICMG 0Dh M Yes
Set Port State 3-59 PICMG 0Eh O/M Yes
Get Port State 3-60 PICMG 0Fh O/M Yes
Compute Power
Properties
3-82 PICMG 10h M Yes
Set Power Level 3-84 PICMG 11h M Yes
Get Power Level 3-83 PICMG 12h M Yes
Renegotiate Power 3-91 PICMG 13h O No
Get Fan Speed Properties 3-86 PICMG 14h
M
if controls Shelf
fans
No
Set Fan Level 3-88 PICMG 15h O/M No
Get Fan Level 3-87 PICMG 16h O/M No
Bused Resource 3-62 PICMG 17h O/M No
Get IPMB Link Info 3-68 PICMG 18h O/M Yes
Get Shelf Manager IPMB
Address
3-38 PICMG 1Bh M No
Set Fan Policy 3-89 PICMG 1Ch M No
Get Fan Policy 3-90 PICMG 1Dh M No
FRU Control Capabilities 3-29 PICMG 1Eh M Yes
FRU Inventory Device
Lock Control
3-42 PICMG 1Fh M No
FRU Inventory Device
Write
3-43 PICMG 20h M No
Get Shelf Manager IP
Addresses
3-36 PICMG 21h M No
Get Shelf Power
Allocation
3-85 PICMG 22h M No
Get Telco Alarm
Capability
3-93 PICMG 29h O/M No
Set Telco Alarm State 3-94 PICMG 2Ah O/M No
Get Telco Alarm State 3-95 PICMG 2Bh O/M No
Get Telco Alarm Location 3-95 PICMG 39h O/M No
Set FRU Extracted 3-25 PICMG 3Ah M No
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support on
IPMC