User guide

Hardware Management
35 AT8910/AT8940
www.kontron.com
Table 4-10:SEL Device Supported Commands for IPMC
Table 4-11:LAN Device Supported Commands for IPMC
Table 4-12:Serial/Modem Device Supported Commands for IPMC
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
SEL Device Commands M O
Get SEL Info 31.2 Storage 40h M M Yes
Get SEL Allocation Info 31.3 Storage 41h O O Yes
Reserve SEL 31.4 Storage 42h O O Yes
Get SEL Entry 31.5 Storage 43h M M Yes
Add SEL Entry 31.6 Storage 44h M M Yes
Partial Add SEL Entry 31.7 Storage 45h M M No
Delete SEL Entry 31.8 Storage 46h O O Yes
Clear SEL 31.9 Storage 47h M M Yes
Get SEL Time 31.10 Storage 48h M M Yes
Set SEL Time 31.11 Storage 49h M M Yes
Get Auxiliary Log Status 31.12 Storage 5Ah O O No
Set Auxiliary Log Status 31.13 Storage 5Bh O O No
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support on
IPMC
LAN Device Commands O O
Set LAN Configuration
Parameters
23.1 Transpor t 01h O/M O/M Yes
Get LAN Configuration
Parameters
23.2 Transport 02h O/M O/M Yes
Suspend BMC ARPs 23.3 Transport 03h O/M O/M Yes
Get IP/UDP/RMCP
Statistics
23.4 Transport 04h O O Yes
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support on
IPMC
Serial/Modem Device
Commands
O O
Set Serial/Modem
Configuration
25.1 Transpor t 10h O/M O/M No
Get Serial/Modem
Configuration
25.2 Transport 11h O/M O/M No
Set Serial/Modem Mux 25.3 Transport 12h O O No
Get TAP Response Codes 25.4 Transport 13h O O No
Set PPP UDP Proxy
Transmit Data
25.5 Transport 14h O O No