User guide

Hardware Management
33 AT8910/AT8940
www.kontron.com
Table 4-5:Event Supported Commands for IPMC
Table 4-6:PEF and Alerting Supported Commands for IPMC
Table 4-7:Sensor Device Supported Commands for IPMC
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
Event Commands M M
Set Event Receiver 29.1 S/E 01h M M Yes
Get Event Receiver 29.2 S/E 02h M M Yes
Platform Event 29.3 S/E 03h M M Yes
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
PEF and Alerting
Commands
O O
Get PEF Capabilities 30.1 S/E 10h M M No
Arm PEF Postpone Timer 30.2 S/E 11h M M No
Set PEF Configuration
Parameters
30.3 S/E 12h M M No
Get PEF Configuration
Parameters
30.4 S/E 13h M M No
Set Last Processed Event
ID
30.5 S/E 14h M M No
Get Last Processed Event
ID
30.6 S/E 15h M M No
Alert Immediate 30.7 S/E 16h O O No
PET Acknowledge 30.8 S/E 17h O O No
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
Sensor Device
Commands
O M
Get Device SDR Info 35.2 S/E 20h O M Yes
Get Device SDR 35.3 S/E 21h O M Yes
Reserve Device SDR
Repository
35.4 S/E 22h O M Yes
Get Sensor Reading
Factors
35.5 S/E 23h O M No
Set Sensor Hysteresis 35.6 S/E 24h O O Yes
Get Sensor Hysteresis 35.7 S/E 25h O O Yes
Set Sensor Threshold 35.8 S/E 26h O O Yes
Get Sensor Threshold 35.9 S/E 27h O O Yes