User guide

Hardware Management
31 AT8910/AT8940
www.kontron.com
Table 4-2:Watchdog Timer Supported Commands for IPMC
Table 4-3:Device Messaging Supported Commands for IPMC
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
BMC Watchdog Timer
Commands
M M
Reset Watchdog Timer 27.5 App 22h M M Yes
Set Watchdog Timer 27.6 App 24h M M Yes
Get Watchdog Timer 27.7 App 25h M M Yes
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
BMC Device and
Messaging
Commands[5]
M O
Set BMC Global Enables 22.1 App 2Eh M O/M Yes
Get BMC Global Enables 22.2 App 2Fh M O/M Yes
Clear Message Flags 22.3 App 30h M O/M Yes
Get Message Flags 224 App 31h M O/M Yes
Enable Message Channel
Receive
22.5 App 32h O O Yes
Get Message 22.6 App 33h M O/M Yes
Send Message 22.7 App 34h M M Yes
Read Event Message
Buffer
22.8 App 35h O O Yes
Get BT Interface
Capabilities
22.10 App 36h M O/M No
Get System GUID 22.14 App 37h O O No
Get Channel
Authentication
Capabilities
22.13 App 38h O O No
Get Session Challenge 22.15 App 39h O O Yes
Activate Session 22.17 App 3Ah O O Yes
Set Session Privilege
Level
22.18 App 3Bh O O Yes
Close Session 22.19 App 3Ch O O Yes
Get Session Info 22.20 App 3Dh O O Yes
Get AuthCode 22.21 App 3Fh O O No
Set Channel Access 22.22 App 40h O O Yes
Get Channel Access 22.23 App 41h O O Yes
Get Channel Info 22.24 App 42h O O Yes
Set User Access 22.26 App 43h O O Yes
Get User Access 22.27 App 44h O O Yes
Set User Name 22.28 App 45h O O Yes