User guide

Product Description
5 AT8910/AT8940
www.kontron.com
System Manager
• Support for basic and micro COM Express ETX Modules with Type 1 connector, according
COMExpress 0 R1.0
• Management connection to System Manager via RS232 front RJ45.
• Basic and Micro ETX use SuperIO LPC to UART Bridge
• UART switched through FPGA
• Management connection to System Manager using front 10/100/1000Base-T RJ45 management
port.
• Front panel USB port
• Support of ETX modules up to 30W
• Additional Ethernet Connection to Base IF and redundant HUB via Dual Ethernet Controller Intel
82580DB
• 1000Base-BX to Base Switch
• 1000Base-BX to Update Channel
• Support for JEDEC SerialATA MO-297 SSD, Port 0 and Port 2
• Support for RTM SATA applications, Port 1 and Port 3
• Support of up to 2 eUSB Flash Modules
Power Requirements
120 W* -38V @ -72V with 12GB of memory, no RTM. Maximum of 225W
* The power consumption will vary depending on your product configuration (RTM & extra memory)
Environmental
Temperature*
Operating: 0-55°C/32-131°F with 30CFM airflow
Storage and Transit: -40 to +70°C/-40 to 158°F
Environmental
Humidity*
Operating: 15% to 90% @55°C/131°F non-condensing
Storage and Transit: 5% to 95% @ 40°C/104°F non-condensing
Environmental Altitude*
Operating: 4,000 m / 13,123 ft
Storage and Transit: 15,000 m / 49,212 ft
Environmental Shock*
Operating: 3G each axis
Storage and Transit: 18G each axis
Environmental
Vibration*
Operating: 5-200Hz. 0.2G, each axis
Storage and Transit: 5Hz to 20Hz @ 1 m2/s3 (0.01g2 /Hz) (flat)
20Hz to 200Hz @ -3dB/oct (slope down)
Reliability
• Whole board protected by active breaker
• USB voltage protected by an active breakers
Safety / EMC
Meet or exceed:
• Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1
• EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386
Warranty Two years limited warranty
Features Description