Instruction Manual

AT8904M Utility Commands
Page 5 - 53 AT8904M CLI Reference Manual
The remaining fields in the trace are specific to the type of OSPF Packet.
HELLO packet field definitions:
Netmask
The netmask in the hello packet.
DesignRouter Designated Router IP address.
Backup Backup router IP address.
DB_DSCR packet field definitions:
MTU
MTU
Options Options in the OSPF packet.
Flags Could be one or more of the following:
I – Init
M – More
MS – Master/Slave
Seq Sequence Number of the DD packet.
LS_REQ packet field definitions:
Length
Length of packet.
LS_UPD packet field definitions.
Length
Length of packet.
LS_ACK packet field definitions.
Length
Length of packet.
5.11.11.1 no debug ospf packet
This command disables tracing of OSPF packets.
Format
no debug ospf packet
Mode Privileged EXEC
5.11.12 debug lacp packet
This command enables tracing of LACP packets received and transmitted by the
switch.
Default
disabled
Format debug lacp packet
Mode Privileged