User Manual

Utility Commands AT8902M
AT8902M CLI Reference Manual Page 5 - 38
Mode Global Config
5.8.17 ip dhcp ping packets
Use this command to specify the number, in a range from 2-10, of packets a DHCP
server sends to a pool address as part of a ping operation. By default the number of
packets sent to a pool address is 2, which is the smallest allowed number when sending
packets. Setting the number of packets to 0 disables this command.
Default
2
Format ip dhcp ping packets <0,2-10>
Mode Global Config
5.8.17.1 no ip dhcp ping packets
This command prevents the server from pinging pool addresses and sets the number of
packets to 0.
Default
0
Format no ip dhcp ping packets
Mode Global Config
5.8.18 service dhcp
This command enables the DHCP server.
Default
disabled
Format service dhcp
Mode Global Config
5.8.18.1 no service dhcp
This command disables the DHCP server.
Format
no service dhcp
Mode Global Config
5.8.19 ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The
addresses are from the automatic address pool.
Default
disabled
Format ip dhcp bootp automatic
Mode Global Config
5.8.19.1 no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address
are from the automatic address pool.
Format
no ip dhcp bootp automatic