User Manual

Utility Commands AT8902M
AT8902M CLI Reference Manual Page 5 - 20
5.3.25 show boardinfo memory-usage
This command displays the memory usage. It shows malloc and kernel statistics as
well as system memory usage statistics
Format
show boardinfo memory-usage
Mode Priviliged EXEC
5.4 Logging Commands
This section describes the commands you use to configure system logging, and to view
logs and the logging settings.
5.4.1 logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default
disabled; critical when enabled
Format logging buffered
Mode Global Config
5.4.1.1 no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode Global Config
5.4.2 logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
enabled
Format logging buffered wrap
Mode Privileged EXEC
5.4.2.1 no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop
when the log file capacity is full.
Format
no logging buffered wrap
Mode Privileged EXEC
5.4.3 logging cli-command
This command enables the CLI command logging feature, which enables the
FASTPATH software to log all CLI commands issued on the system.
Default
enabled
Format logging cli-command