Owner manual

AT8902 Software Description
Page 4 - 2 AT8902 User Guide
4. Software Description
Software on the AT8902 includes the following parts:
• Bootloader
• OS (rootFS, kernel)
• Application SW
•IPMI FW
The Software accomplishes operation of the switching hardware and is therefore also refer-
enced as firmware. It is preinstalled on the system and can only be updated by a dedicated
update procedure. This manual only describes bootloader, its self tests and IMPI Firmware and
introduces the update procedure.
For additional information of system configuration using CLI commands refer to documentation
“AT8902 CLI Reference Manual”.
4.1 Supported RFCs
The Software supports the following standards and RFCs.
4.1.1 Management
• RFC 826 - ARP
• RFC 854 - Telnet
• RFC 855 - Telnet Option
• RFC 1155 - SMI v1
• RFC 1157 - SNMP
• RFC 1212 - Concise MIB Definitions
• RFC 1867 - HTML/2.0 Forms w/ file upload extensions
• RFC 1901 - Community based SNMP v2
• RFC 2068 - HTTP/1.1 protocol as updated by draft-ietf-http-v11-spec-rev-03
• RFC 2246 - The TLS Protocol, Version 1.0
• RFC 2271 - SNMP Framework MIB
• RFC 2295 - Transparent Content Negotiation
• RFC 2296 - Remote Variant Selection; RSVA/1.0 State Management "cookies"
• RFC 2346 - AES Ciphersuites for Transport Layer Security